FlashForge PLA 1,75 mm mattapunainen 1 kg 3D-tulostimen filamentti

Printing with standard PLA often leaves a glossy, plastic-looking finish that can detract from the final appearance of your models. This FlashForge PLA filament in Matte Red delivers a smooth, low-shine surface that hides layer lines and gives your prints a professional, premium look right off the build plate. With a consistent 1.75mm diameter and tight tolerance, it feeds reliably through your printer, reducing clogs and failed prints. The 1kg spool is vacuum sealed with desiccant to keep the filament dry and ready to use.

Who is it for

This filament is ideal for hobbyists, educators, and professionals who want high-quality, visually appealing prints without post-processing. It works with most FDM 3D printers that accept 1.75mm PLA, making it a versatile choice for prototypes, art pieces, and functional parts where a matte finish is desired.

Main features

• Matte red finish for a professional, low-glare appearance
• High-precision diameter of 1.75mm ±0.02mm for consistent extrusion
• Low odor and easy to print, suitable for beginners and experts
• Vacuum sealed with desiccant to prevent moisture absorption
• Biodegradable PLA material, more environmentally friendly than ABS

Specifications

• Material: PLA (Polylactic Acid)
• Diameter: 1.75mm
• Tolerance: ±0.02mm
• Net weight: 1kg
• Print temperature: 190-220°C
• Bed temperature: 0-60°C
• Density: 1.24 g/cm³
• Tensile strength: >50 MPa
• Elongation at break: >3%
• Spool diameter: 200mm
• Spool hub diameter: 55mm
• Spool width: 65mm

Tips

For best results, store the filament in a dry place or use a filament dryer if exposed to humidity. Start with a nozzle temperature of 200°C and adjust as needed. A heated bed is not required, but if your printer has one, set it to 50-60°C for improved adhesion. The matte finish may slightly reduce layer bonding compared to standard PLA, so consider increasing extrusion temperature by 5-10°C for stronger parts.