Fujitsu PY-LA344 verkkokortti sisäinen Ethernet 10000 Mbit/s

The Fujitsu PY-LA344 10000 Mbit/s PCI Express Wired network card is an internal Ethernet adapter engineered for high-throughput wired connections. Designed for installation into a PCI Express slot, this card supports a maximum data transfer rate of 10000 Mbit/s and conforms to IEEE 802.3 networking standards. It is intended to improve network performance and reliability in servers and high‑performance workstations that require stable, low-latency wired connectivity.

Advantages

The card delivers a high maximum data transfer rate of 10000 Mbit/s over a wired Ethernet connection while using the PCI Express host interface for direct system integration. Compliance with IEEE 802.3 ensures broad interoperability with existing network equipment. Its internal design reduces cable clutter and centralizes network access in rack-mounted or desktop systems, supporting demanding network traffic and continuous operation.

Key specifications

• Connectivity technology: Wired Ethernet
• Host interface: PCI Express
• Maximum data transfer rate: 10000 Mbit/s
• Networking standards: IEEE 802.3

How to use

Power down the computer or server and open the chassis according to the manufacturer’s instructions. Insert the Fujitsu PY-LA344 card into a compatible PCI Express slot and secure it to the chassis. Connect the external Ethernet cable to the card’s port and route it to your network switch or router. Power on the system, then install or verify appropriate drivers and firmware supplied by the system vendor or Fujitsu. Configure IP addressing and network settings in the operating system or network management tools as required.

Recommendations

For stable operation at peak throughput, use compatible CAT6A or better cabling and ensure network switch ports support 10 Gbit/s Ethernet. Keep firmware and drivers up to date and install the card in a properly ventilated system to maintain thermal stability under sustained load.