GHIANT Lexan Spray -spraymaali, Aprillia Green, nro 944, 150 ml

This ready-to-use, quick-drying, and fuel-resistant lightweight spray paint in Aprillia Green is specially developed for polycarbonate bodies.

The special solvent etches the surface to allow the paint to bond permanently with the polycarbonate.

Designed for racing, it can provide up to 15 grams less weight on a 1/10 scale race body compared to pre-painted or water-based colored bodies, which helps lower the center of gravity.

Delivered in a 150ml spray can, it offers excellent coverage when applied in light coats and is easy to use for achieving high-quality results on RC car bodies.

• Aprillia Green spray paint for polycarbonate RC car bodies, 150 ml

Hazard statements (H codes)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Precautionary statements (P codes)

• P210: Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.
• P251: Do not pierce or burn, even after use.
• P305 / P351 / P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 / P313: IF eye irritation persists: Get medical advice/attention.
• P403 / P233: Store in a well-ventilated place. Keep container tightly closed.
• P410 / P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Supplemental hazard information

• EUH066: Repeated exposure may cause skin dryness or cracking.

In the box

• 1× 150 ml spray paint

Before painting, remove dirt particles, cut out the body and sand the cut edges. Mask areas that are not to be painted with masking film or tape; make sure surfaces are dry and free of dust.

Many bodies have a transparent protective foil on the outside. Do not remove it until the paint has dried.

Paint dark colours before light colours to prevent the dark colours from showing through.

Shake the can vigorously for approx. 2 min. before use, until the mixing ball rattles. Spray from approx. 20–30 cm using even cross movements.

Covering capacity varies slightly by colour. Apply light coats to avoid bleeding; the final result takes 2–3 coats. Wait approx. 5 min. between coats rather than applying one heavy coat. Let the paint dry for 5 min. before removing the masking film and applying the next coat.

After use, turn the can upside down and spray for 2 s until the nozzle is empty.

Fluorescent colours appear not to cover as well as normal colours. Apply only very light coats at temperatures above 15 °C, spraying from a distance of +/-15/20 cm.

Let fluorescent colour dry for 30 min., then back it with white RC Car Colour to obtain the fluorescent effect.

RC Car Colours Aprillia Green is a paint for Lexan car bodies. The solvent etches the body surface so the paint bonds permanently with the plastic. The paint remains elastic, even in a strong crash, and does not chip or scratch.

Highlights

• Remains elastic
• Bonds permanently with the body
• Fuel-resistant

Hazard statements (H codes)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Precautionary statements (P codes)

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P251: Do not pierce or burn, even after use.
• P305 / P351 / P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 / P313: IF eye irritation persists: Get medical advice/attention.
• P403 / P233: Store in a well-ventilated place. Keep container tightly closed.
• P410 / P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Supplemental hazard information

• EUH066: Repeated exposure may cause skin dryness or cracking.

In the box

• 1× Aprillia Green, 150 ml

Notes

Many bodies have a protective foil on the outside; remove it only after painting. Some prefer to cut out the body beforehand.

Clean the body thoroughly with dish soap or brake cleaner and shake the can vigorously for about 2 min.

Spray the paint from a distance of 20–30 cm. When using multiple colours, start with the darkest, as dark colours otherwise show through light ones.

Apply several thin coats instead of one thick coat and wait about 5 min between sprays.

Wait at least 5 min before removing the protective film or masking film of the design.

After use, turn the can upside down and spray for about 2 s to empty the nozzle.

• Note for neon/fluorescent colours: This paint is not as opaque as standard colours; apply several fine coats.

For neon/fluorescent colours, the ambient temperature should be at least 15 °C and the spray distance 15–20 cm.

For neon/fluorescent colours, wait about 30 min and back the paint with white to achieve the luminous effect.

• Brand: Ghiant