Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

GHIANT Lexan -spraymaali, musta, nro 610, 150 ml

GHIANT Lexan -spraymaali, musta, nro 610, 150 ml
GHIANT Lexan -spraymaali, musta, nro 610, 150 ml
9,64 €
PDF
PDF
Varasto 20 Tuotekoodi 4338780 Malli RCC610 Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika tiistai 1. joulukuuta
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

Kuvaus

This ready-to-use, quick-drying, and fuel-resistant black Lexan spray paint is specially developed for polycarbonate racing bodies.

The special solvent etches the surface to ensure the paint bonds permanently with the polycarbonate.

Designed as a lightweight paint, it can save up to 15 grams of weight on a 1/10 scale race body compared to pre-painted or water-based colored bodies, which also lowers the center of gravity.

Delivered in a 150ml spray can, it should be applied in multiple light coats from a distance of approximately 20 to 30 cm for optimal results.

  • Black spray paint for polycarbonate RC car bodies, 150 ml
  • Specifications
  • Hazard statements (H codes)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • Precautionary statements (P codes)
  • P210: Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.
  • P251: Do not pierce or burn, even after use.
  • P305 / P351 / P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337 / P313: IF eye irritation persists: Get medical advice/attention.
  • P403 / P233: Store in a well-ventilated place. Keep container tightly closed.
  • P410 / P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • Supplemental hazard information
  • EUH066: Repeated exposure may cause skin dryness or cracking.

In the box

  • 1× 150 ml spray paint

Before painting, remove dirt particles, cut out the body and sand the cut edges. Mask areas that are not to be painted with masking film or tape; make sure surfaces are dry and free of dust.

Many bodies have a transparent protective foil on the outside. Do not remove it until the paint has dried.

Paint dark colours before light colours to prevent the dark colours from showing through.

Shake the can vigorously for approx. 2 min. before use, until the mixing ball rattles. Spray from approx. 20–30 cm using even cross movements.

Covering capacity varies slightly by colour. Apply light coats to avoid bleeding; the final result takes 2–3 coats. Wait approx. 5 min. between coats rather than applying one heavy coat. Let the paint dry for 5 minutes before removing the masking film and applying the next coat.

After use, turn the can upside down and spray for 2 s until the nozzle is empty.

Fluorescent colours appear not to cover as well as normal colours. Apply only very light coats at temperatures above 15 °C, spraying from a distance of +/-15/20 cm.

Let fluorescent colour dry for 30 min., then back it with white RC Car Colour to obtain the fluorescent effect.

RC Car Colours is a black paint for Lexan car bodies. The solvent etches the body surface so the paint bonds permanently with the plastic. The paint remains elastic, even in a strong crash, and does not chip or scratch.

  • Highlights
  • Remains elastic
  • Bonds permanently with the body
  • Fuel-resistant
  • Technical data
  • Hazard statements (H codes)
  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • Precautionary statements (P codes)
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P251: Do not pierce or burn, even after use.
  • P305 / P351 / P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337 / P313: If eye irritation persists: Get medical advice/attention.
  • P403 / P233: Store in a well-ventilated place. Keep container tightly closed.
  • P410 / P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
  • Supplemental hazard information
  • EUH066: Repeated exposure may cause skin dryness or cracking.

In the box

  • 1× Lexan paint black No. 610, 150 ml
  • Notes

Remove any protective foil on the outside of the body only after painting; the body can be cut out beforehand.

Clean the body thoroughly with dish soap or brake cleaner and shake the can vigorously for approx. 2 min.

Spray the paint from a distance of 20–30 cm. When using multiple colours, start with the darkest, as dark colours can otherwise show through the light ones.

Apply several thin coats instead of one thick coat and wait approx. 5 min between sprays.

Wait at least 5 min before removing the protective film or masking film of the design.

After use, turn the can upside down and spray for approx. 2 s to empty the nozzle.

  • Brand: Ghiant

Tekniset tiedot

Tekniset tiedot
EAN
5412966226106
Kategoria
Spraymaalit
Malli
RCC610
Materiaali
Polykarbonaatti
Merkki
Ghiant
MPN
RCC610
Tuotteen väri
Musta
Hintahistoria viimeisen 6 kuukauden ajalta
GHIANT Lexan -spraymaali, musta, nro 610, 150 ml
Nykyinen
9,64 €
Alin 7 pv
9,54 €
Ylin 7 pv
9,64 €
Muutos 24 h
0,00 €   0%
Muutos 7 pv
+0,10 €   +1%
Muutos 30 pv
—   

Kirjoita arvostelu

Arvosana *
Nimesi näytetään julkisesti – voit käyttää nimimerkkiä. Kutsumme ostajia kirjoittamaan arvosteluja; tarkistamme arvostelut ennen julkaisua ja julkaisemme myös kriittiset.

Lisää GHIANT-tuotteita tässä kategoriassa

12

Suositut tuotteet tässä kategoriassa

6
Myyjä: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
WhatsApp
Messenger
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.
Kaikki kategoriat