HDMI-kaapeli Vivolink OPTIC 4K 7,5 m

The VivoLink OPTIC HDMI 4K Cable (7.5 m) supports HDMI 2.0 with a maximum resolution of 4096 x 2160 at 60Hz and 4:4:4 chroma sampling. It delivers a data rate up to 18 Gbit/s, HDR 12-bit support, HDCP 2.2 compatibility, 3D and ARC. The slim cable profile measures approximately 4.0 mm and connectors are gold-plated for reliable signal transfer. Tensile strength (pull resistance) is rated at 20 kg.

Advantages

The cable provides stable high-bandwidth transmission for 4K/60Hz video with full chroma detail and HDR 12-bit color depth while remaining thin and flexible for easier routing. Gold-plated connectors reduce contact resistance and the HDCP 2.2 support ensures compatibility with protected content. A 20 kg tensile rating gives basic mechanical robustness for typical installations.

Suitable for

• Home theater systems with 4K/60Hz displays
• Projectors and displays where high resolution is required over longer distances
• AV installations requiring ARC and 3D support
• Professional setups needing HDCP 2.2 compatibility

Key specifications

• Length: 7.5 m
• Standard: HDMI 2.0
• Maximum resolution: 4096 x 2160 @ 60Hz
• Chroma: 4:4:4
• Bandwidth: up to 18 Gbit/s
• HDR: 12-bit
• Copy protection: HDCP 2.2
• Features: 3D, ARC
• Cable thickness: ~4.0 mm
• Tensile strength: 20 kg
• Connectors: gold-plated

How to use

Connect one end of the cable to the HDMI output of your source device (Blu-ray player, media streamer, PC, etc.) and the other end to the HDMI input of your display or AV receiver. Ensure devices are powered off when connecting if recommended by the manufacturer, then power on and select the correct HDMI input on the display. Configure source and display settings (resolution, HDR, audio return channel) as needed to match capabilities.

Recommendations

For best performance, avoid sharp bends and excessive tension; maintain gentle cable routing and secure connectors. Use this cable in installations where a slim, flexible HDMI 2.0 cable is required for 4K/60Hz signals. If you experience signal issues at long runs, verify both source and display support the selected resolution and HDCP 2.2.