Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

HP RM2-2586-000CN kiinnitysyksikkö lisävaruste

HP RM2-2586-000CN kiinnitysyksikkö lisävaruste
HP RM2-2586-000CN kiinnitysyksikkö lisävaruste
179,18 €
The HP RM2-2586-000CN fuser accessory is a replacement fuser assembly designed for use in compatible HP printers. Operating at 220 VAC, the unit bonds toner to paper using controlled heat and ensures consistent print quality. It weighs approximately 900 g and its packaging dimensions (width 406 mm, ... Lue lisää
Varasto 90 Tuotekoodi 1521999 Merkki HP Malli RM2-2586-000CN Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika Maanantai, Lokakuu 19
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

The HP RM2-2586-000CN fuser accessory is a replacement fuser assembly designed for use in compatible HP printers. Operating at 220 VAC, the unit bonds toner to paper using controlled heat and ensures consistent print quality. It weighs approximately 900 g and its packaging dimensions (width 406 mm, depth 226 mm) reflect the part's compact size for storage and handling.

Advantages

This fuser assembly provides stable heat distribution for reliable toner fusion and consistent print density across pages. As an OEM accessory from HP, it matches the original part specifications to help maintain print longevity and reduce the risk of image defects related to fuser wear. Its replacement design supports straightforward installation in compatible models.

Suitable for

  • Replacement of worn or faulty fusers in compatible HP printers
  • Maintenance tasks to restore proper toner fixation and print quality
  • Small office or home office printers requiring OEM fuser parts

Key specifications

  • Brand: HP
  • Manufacturer part number (MPN): RM2-2586-000CN
  • EAN: 5706998851352
  • Operating voltage: 220 VAC
  • Function: Bonds toner to paper with heat (fuser assembly)
  • Weight (approx.): 900 g
  • Package dimensions (approx.): width 406 mm, depth 226 mm

How to use

Power off the printer and disconnect it from the mains before replacing the fuser. Allow the unit to cool if recently used. Remove the service door or access panels according to the printer service manual, extract the old fuser assembly, and install the HP RM2-2586-000CN in the correct orientation until it clicks or seats securely. Refit panels, reconnect power, and run a printer warm-up cycle or test page to verify correct installation and print quality.

Recommendations

Use genuine HP replacement parts and follow the printer manufacturer's service instructions. Replace the fuser when print defects such as streaks, ghosting, or poor toner adhesion appear, and avoid handling the heating surface directly to prevent burns or damage.
Tärkeimmät ominaisuudet
  • Replacement of worn or faulty fusers in compatible HP printers
  • Maintenance tasks to restore proper toner fixation and print quality
  • Small office or home office printers requiring OEM fuser parts
  • Brand: HP
  • Manufacturer part number (MPN): RM2-2586-000CN
  • EAN: 5706998851352
  • Operating voltage: 220 VAC
  • Function: Bonds toner to paper with heat (fuser assembly)
  • Weight (approx.): 900 g
  • Package dimensions (approx.): width 406 mm, depth 226 mm
Tekniset tiedot
Paino
900 g
Pakkauksen korkeus
179 mm
Pakkauksen leveys
406 mm
Pakkauksen paino
1.4 kg
Pakkauksen syvyys
226 mm
Hintahistoria viimeisen 6 kuukauden ajalta
HP RM2-2586-000CN kiinnitysyksikkö lisävaruste
Nykyinen
179,18 €
Alin
165,87 €
Ylin
215,43 €
Muutos 24 h
-1,94 €   -1%
Viikko
-0,66 €   0%
Kuukausi
+13,31 €   +8%

Suositut tuotteet tässä kategoriassa

Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.