Hypertec ProConnectLite DVI-kaapeli 10 m DVI-D musta

The Hypertec ProConnectLite 10 m DVI-D cable in black is designed for transmitting digital video signals between DVI-D equipped devices. With DVI-D connectors on both ends and a 10 metre length, it supports direct connection of monitors, projectors and other displays where a digital DVI link is required. The cable's construction aims to reduce signal degradation over longer runs while maintaining a discreet black finish suitable for professional and home setups.

Advantages

This DVI cable provides a consistent digital video connection with minimal signal loss across its 10 m length. The DVI-D connectors ensure a pure digital link without analogue pins, which simplifies compatibility with DVI-D displays and graphics outputs. The cable's black outer jacket is resistant to everyday handling and blends into typical AV installations, and its straightforward design focuses on reliable transmission rather than additional adapters or converters.

Suitable for

Key specifications

How to use

Connect one DVI-D connector to the DVI-D output on the video source and the other connector to the DVI-D input on the display device. Ensure connectors are aligned and seated firmly to avoid loose contacts. For installations over longer distances, route the cable to avoid sharp bends and sources of strong electromagnetic interference. Power on the source and display, then select the appropriate input on the display if necessary.

Recommendations

For best results, use the cable for digital-only DVI connections (DVI-D). Avoid forcing the connector into incompatible DVI-A or VGA-only ports. If a longer run or different connector types are required, consider using an active extender or alternative digital interfaces while keeping cable bends gentle and securing connections to prevent accidental disconnection.