Imuroiva robotti Ecovacs Deebot X11 OmniCyclone

Black vacuum and mop robot with a bagless All-in-One OmniCyclone station combines vacuuming and wet mopping into a single device. The robot uses OZMO Roller 2.0 and Blast Technology for improved dirt and stain removal, and returns automatically to its base station for charging and maintenance. The station provides Hot Water Soak Washing and supports dual cleaning solutions without disposable bags. The robot features a high-power suction system rated at 19500 Pa and operates quietly at approximately 62.9 dB. It runs on a 6400 mAh lithium-ion battery with a typical runtime of up to 206 minutes and a 3-hour recharge time.

Advantages

The integrated All-in-One OmniCyclone station offers bagless operation and hot water soak washing to reduce manual maintenance. OZMO Roller 2.0 together with Blast Technology enhances mopping performance on hard floors, while TruEdge 3.0 Extreme Edge Cleaning improves cleaning along skirting boards and corners. PowerBoost Charging ensures the robot returns to operation quickly, and the TruePass Adaptive 4WD climbing system allows traversal of thresholds and carpets. AIVI 3D 3.0 OMNI-Approach technology and Agent YIKO provide smarter object recognition and cleaning adaptation.

Key specifications

• Cleaning modes: vacuuming and wet mopping
• Suction power: 19500 Pa
• Noise level: 62.9 dB
• Battery: Lithium‑Ion 6400 mAh
• Runtime: up to 206 minutes
• Charging time: 3 hours (PowerBoost Charging)
• Station: Bagless All‑in‑One OmniCyclone with Hot Water Soak Washing and Dual Cleaning Solutions
• Mopping system: OZMO Roller 2.0 + Blast Technology
• Edge cleaning: TruEdge 3.0 Extreme Edge Cleaning
• Drive system: TruePass Adaptive 4WD Climbing System
• Smart features: AIVI 3D 3.0 OMNI-Approach Technology, Agent YIKO
• Dust container (station): bagless 0.22 L
• Automatic base station return

How to use

Place the robot on a flat surface and ensure the All‑in‑One OmniCyclone station is connected to power and filled with the recommended cleaning solutions. Start a cleaning cycle via the mobile app or on the device; the robot will map the area, vacuum and mop using OZMO Roller 2.0, and return to the station for hot water soak washing and recharging when the job is complete or the battery is low. For stubborn stains, select a higher cleaning mode or run additional cycles. Regularly check and rinse the roller and clean the station according to the user manual.

Recommendations

For best results, use the manufacturer's recommended cleaning solutions, empty and inspect the bagless 0.22 L dust compartment periodically, and remove obstacles from thresholds to allow the TruePass Adaptive 4WD system to climb smoothly. Schedule routine maintenance through the app and follow safety instructions in the manual.