InLine patch-kaapeli S/FTP PiMF Cat.6A halogeeniton 500 MHz valkoinen 15 m

The InLine Patch Cable S/FTP PiMF Cat.6A halogen free 500MHz white 15m is a high-performance network patch cable designed for professional cabling in data centers and server racks. Constructed for Gigabit and 10 Gigabit Ethernet environments, it features S/FTP (shielded/foiled twisted pair) PiMF shielding and RJ-45 connectors on both ends. The halogen-free jacket reduces toxic gases in the event of fire, and the 500 MHz frequency rating supports high-bandwidth applications over its 15 m length.

Advantages

S/FTP PiMF shielding provides improved protection against electromagnetic interference and crosstalk, supporting reliable data transmission at high speeds. The Cat.6A specification and 500 MHz bandwidth enable dependable performance for Gigabit and 10 Gigabit networks. A halogen-free outer jacket increases safety in confined spaces such as racks and data centers. Standard RJ-45 connectors ensure wide compatibility with network equipment.

Suitable for

• Data centers and server room patching
• Gigabit and 10 Gigabit Ethernet connections
• Structured cabling between switches, patch panels and servers
• Environments requiring halogen-free cabling

Key specifications

• Cable type: S/FTP PiMF (shielded/foiled twisted pair)
• Category: Cat.6A
• Frequency: 500 MHz
• Length: 15 m
• Connectors: RJ-45 to RJ-45
• Colour: White
• Halogen-free jacket

How to use

Connect one RJ-45 connector to a network switch, patch panel or router and the other RJ-45 connector to the target device such as a server or workstation. Route the cable carefully through cable management paths in racks to avoid sharp bends and mechanical strain. Ensure both ends are fully inserted into the ports until the connector latches. Verify link status on network devices after installation.

Recommendations

For optimal performance, avoid tight bending radii and sources of strong electromagnetic interference. Use appropriate cable management in racks and patch panels to prevent mechanical stress. Replace the cable if connector damage or excessive wear is observed.