InLine sisäinen Y-virtakaapeli 1x 5,25" Molex / 1x 5,25" Molex + 1x 3,5" Floppy

This Y-shape internal power cable from InLine lets you power two devices from a single 5.25" ATX power-supply output. It combines one 5.25" (13.34 cm) Molex connector with an additional 5.25" Molex and a 3.5" floppy connector, enabling connection of hard drives, optical drives or legacy floppy devices while keeping cable runs short with its 0.2 m length.

Advantages

The cable supports simultaneous power delivery to two peripherals from one standard 5.25" Molex power outlet, reducing the number of free PSU connectors required. Its compact 0.2 m length helps with neat cable management inside compact or standard PC cases. Multicolour wiring allows easy visual identification of connectors.

Suitable for

• Connecting an internal hard drive and an optical drive to one PSU Molex output
• Powering legacy 3.5" floppy drives alongside other Molex-powered devices
• Small form-factor builds or upgrades where PSU connectors are limited

Key specifications

• Connectors: 1× 5.25" Molex input → 1× 5.25" Molex + 1× 3.5" floppy output
• Cable length: 0.2 m
• Manufacturer: InLine
• MPN: 29658
• EAN: 4043718003679
• Colour: Multicolour

How to use

Shut down the PC and disconnect the power supply before installing. Plug the single 5.25" Molex input of the Y-cable into an available Molex power connector from the ATX power supply. Connect the 5.25" Molex and the 3.5" floppy outputs to the respective devices' power sockets, ensuring correct orientation to avoid misalignment. Reconnect power and start the system to verify devices receive power.

Recommendations

Do not exceed the power supply’s rated current on the Molex rail; avoid using the cable for devices that together draw more current than the PSU connector supports. Keep the cable away from moving parts and sharp edges to prevent insulation damage.