Jäähdytin Inter-Tech B-14 prosessori 8 cm musta hopea

The Cooler Inter-Tech B-14 Processor 8 cm Black Silver is a compact CPU cooler engineered for high thermal loads while maintaining a small footprint. It combines an 80 mm fan, a durable ball bearing and a two-tone black and silver finish to provide stable airflow and reliable operation. The fan speed ranges from 1000 to 4000 RPM, producing airflow up to 50 cfm and a maximum static pressure of 7.8 mmH2O. Noise levels vary between 16 dB at low speeds and 42.2 dB at maximum speed. The cooler is specified for a Thermal Design Power (TDP) of 205 W and is compatible with LGA 3647 (Socket P) processors.

Advantages

The Inter-Tech B-14 offers a balance of compact size and high cooling capacity suitable for dense or space-limited systems. Its wide fan speed range enables flexible control between quiet operation and maximum cooling performance. The ball bearing construction supports extended operational life under continuous use, while the measured airflow, air pressure and specified TDP indicate capability for demanding workloads. The black and silver finish provides a neutral aesthetic that integrates with different system builds.

Suitable for

• Workstations and servers using LGA 3647 (Socket P) processors
• Compact systems where cooler height and footprint must be minimized
• High-load computing tasks that require a cooler rated for up to 205 W TDP
• Setups requiring variable noise and performance profiles

Key specifications

• Type: Cooler
• Fan diameter: 80 mm
• Fan speed: 1000–4000 RPM
• Airflow: up to 50 cfm
• Maximum air pressure: 7.8 mmH2O
• Noise level: 16–42.2 dB
• Bearing type: Ball bearing
• Thermal Design Power (TDP): 205 W
• Supported processor socket: LGA 3647 (Socket P)
• Weight: 0.6 kg
• Product colour: Silver, Black

How to use

Install the cooler according to the motherboard and chassis manufacturer guidelines for LGA 3647 sockets, ensuring secure and even mounting to achieve optimal contact with the processor heat spreader. Connect the fan to the appropriate fan header to allow speed control via BIOS or a dedicated fan controller. Adjust fan speed profiles to match cooling needs: lower speeds for quiet idle operation and higher speeds under sustained high load to maintain processor temperatures within recommended limits.

Recommendations

For consistent performance, verify clearance within the chassis and confirm airflow direction aligns with case ventilation. Periodically inspect the fan and bearing for dust buildup and clean as needed to preserve airflow and prolong service life. Use fan control settings to balance noise and cooling depending on workload.