Kaapeli DELOCK Micro-Fit 3.0 4-napainen uros-uros, 50 cm

DELOCK Micro‑Fit 3.0 4‑pin male-to-male cable, 50 cm, provides a compact, fixed-length connection solution for internal power or signal wiring in PCs, servers and electronic devices. Both ends are fitted with Micro‑Fit 3.0 4‑pin male straight connectors designed for use with compatible Micro‑Fit 3.0 headers. The cable is intended for short internal runs where a reliable, space-saving connector system is required.

Advantages

The cable offers a standardized 3.00 mm pitch connector system that ensures reliable electrical contact and easy mating with Micro‑Fit 3.0 receptacles. With a 0.5 m length it balances flexibility and neat cable routing in compact enclosures. The two‑ended male configuration simplifies point‑to‑point connections between devices or internal headers without additional adapters, and the color coding of conductor insulation supports clear identification during installation.

Suitable for

• Internal power connections inside desktop PCs and small form‑factor systems
• Connecting power or signal headers on motherboards, add‑in cards or daughterboards that use Micro‑Fit 3.0
• Power distribution and wiring in servers, NAS devices or industrial electronics with compatible headers
• Compact systems such as Intel NUC where Micro‑Fit 3.0 interfaces are used

Key specifications

• Cable length: 0.5 m (50 cm)
• Connector type (each end): Micro‑Fit 3.0 4‑pin male straight
• Pitch: 3.00 mm (Micro‑Fit 3.0)
• Conductor colors: black and yellow insulation visible
• Application: internal wiring for power and compatible signal connections

How to use

Identify the Micro‑Fit 3.0 4‑pin male headers on both devices or circuit boards to be connected. Align the connectors carefully with the mating Micro‑Fit 3.0 receptacles and press evenly until fully seated to ensure correct contact. Route the 0.5 m cable to avoid sharp bends, high‑temperature areas and moving parts. If necessary, secure the cable with cable ties or clips to prevent strain on the connectors.

Recommendations

Use this cable only with compatible Micro‑Fit 3.0 4‑pin receptacles and within the electrical and thermal limits of the connected devices. Verify connector orientation before insertion to prevent damaged pins. For reliable long‑term performance, avoid excessive mechanical strain, protect the cable from abrasion, and keep it away from heat sources.