Kysy tästä tuotteesta
Kahden näytön varsi Kensington SmartFit One-Touch K59601WW
Toimitus ja palautukset
282,61 €
ALV 0 %:225,19 €
33,98 €
ALV 0 %:27,07 €
112,84 €
ALV 0 %:89,91 €
121,96 €
ALV 0 %:97,18 €
27,77 €
ALV 0 %:22,13 €
51,48 €
ALV 0 %:41,02 €
35,13 €
ALV 0 %:27,99 €
-90x90h.webp "Pelitietokone kokoa itse — Ryzen 7 7700 + RTX 5070, 32GB DDR5 | DistriNode")
1 822,98 €
ALV 0 %:1 452,58 €
2 056,44 €
ALV 0 %:1 638,60 €
1 594,82 €
ALV 0 %:1 270,77 €
120,52 €
ALV 0 %:96,03 €
22,47 €
ALV 0 %:17,90 €
27,70 €
ALV 0 %:22,07 €
Professionals who spend long hours working at a desk often struggle with poor posture, eye strain, as well as neck, back and shoulder discomfort. The SmartFit™ One-Touch Height Adjustable Dual Monitor Arm supports more comfortable monitor placement. Thoughtfully designed to simplify proper ergonomic fit, it offers a fully articulating design for maximum flexibility. A heavy-duty build provides stability in every position while its gas spring monitor mount makes adjusting the height, depth and angle of your monitors effortless — from landscape to portrait mode. The built-in cable management system organises and conceals cables while the arm lifts your external monitor up and out of the way, decluttering and clearing valuable desk space.
SmartFit™ - Comfort Made Easy
Supports proper ergonomic eye-level viewing angles using data-driven research and a colour-coded fitting chart to support quick and intuitive height-setting.
One-touch adjustable arms with built-in gas spring and counterbalance tension adjustment
Enjoy effortless adjustment of each external monitor’s height, depth and angle. With 170 -505 mm) height adjustment, ±90° swivel and monitor rotation and ±90° tilt adjustment, the One-Touch fully articulating gas spring monitor mount gives you total control over the placement of your dual monitors, from landscape to portrait mode and side-by-side to vertically stacked. Its counterbalance tension adjustment allows you to ‘tighten’ or ‘loosen’ each arm to accommodate a range of monitor weights with the same effortlessness and stability (Allen key included).
Heavy duty, stability focused design
The Kensington SmartFit™ One-Touch Height Adjustable Dual Monitor Arm is stable in every position, supporting a 13′–34′′ flat or curved monitors weighing up to 9kg (19.8lbs).
Easy, non-permanent installation
Mountable by C-clamp (desktop thickness range: 10–85mm or grommet hole (desktop thickness range: 10–80mm; diameter range: 10.5mm–50mm), installation is non-permanent and non-marking, making removal easy – tool kit included. An included quick-release, detachable VESA 75/100 plate makes the fully articulating dual arm ideal for VESA mountable monitors.
Cable management system
The product’s cable management system organises and conceals cables while the arms lift your dual monitors up and out of the way, decluttering and clearing valuable desk space at once.
Kensington durability
The Kensington SmartFit™ One-Touch Height Adjustable Dual Monitor Arm is tested to meet ANSI/BIFMA standards. Trust in the dependability of a heavy duty monitor arm and enjoy stability and effortless adjustment for years to come.
How to use
Attach the arm to your desk using the included c‑clamp or grommet kit according to desk thickness and hole diameter. Fasten the detachable quick‑release VESA plate to each monitor and mount the monitors on the arms. Use the SmartFit® colour chart to select the recommended height setting based on your hand size, then adjust each arm’s height, depth and angle with the gas spring mechanism. Fine‑tune the counterbalance tension with the supplied Allen key so the arm holds the monitor smoothly at any position.
Recommendations
For optimal ergonomics, position the top of the monitor at or slightly below eye level, keep the screen about an arm’s length away, and use the SmartFit® chart to set consistent height across users. Periodically check and tighten the counterbalance and mounting hardware to maintain safe, stable operation.
SmartFit® system
Master dual monitor ergonomics — proper dual monitor heights — with the SmartFit® System. Simply match your hand size to the colour on the provided chart, set the height to your colour and you're done.
One-touch adjustable arms with built-in gas spring and counterbalance tension adjustment
Enjoy effortless adjustment of each external monitor's height, depth and angle. With 170–505 mm height adjustment, ±90° swivel and rotation, and ±90° tilt, the One-Touch fully articulating gas-spring monitor mount gives you total control over dual monitor placement — from landscape to portrait mode and side-by-side to vertically stacked. Its counterbalance tension adjustment lets you ‘tighten’ or ‘loosen’ each arm to accommodate a range of monitor weights with the same ease and stability (Allen key included).
Heavy duty, stability focused design
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor Arm is stable in every position, supporting 13″–34″ flat or curved monitors weighing up to 9 kg (19.8 lbs).
Easy, non-permanent installation
Mountable by C-clamp (desktop thickness range: 10–85 mm) or grommet hole (desktop thickness range: 10–80 mm; diameter range: 10.5–50 mm). Installation is non-permanent and non-marking, making removal easy — tool kit included. An included quick-release, detachable VESA 75/100 plate makes the fully articulating dual arm ideal for VESA-mountable monitors.
Cable management system
The product's cable management system organises and conceals cables while the arms lift your dual monitors up and out of the way, decluttering and freeing valuable desk space.
Kensington durability
The Kensington SmartFit® One-Touch Height Adjustable Dual Monitor Arm is tested to meet ANSI/BIFMA standards. Rely on the durability of a heavy-duty monitor arm and enjoy stability and effortless adjustment for years to come.
Suositut tuotteet tässä kategoriassa
- Pöytäkiinnitteinen näyttövarsi kaasujousella Arctic X1-3D — näytöille enintään 43 tuumaa / 10 kg, VESA 75x75–100x100, musta
- Näyttöpidike Gembird MA-DA-03 32 tuuman näytöille, pöytäpuristin/läpivienti, kaksivartinen, VESA 75x75–100x100, musta
- AOC AM400B näyttöteline jalusta 34" pöytä musta puristus-/läpivientiasennus
- Kaksoisnäyttöteline 13-30 Huanuo HNDS6
- Ergotron LX Pro - asennussarja (kääntövarsi) - modulaarinen - LCD-näytölle - musta - näytön koko: enintään 86,4 cm (enintään 34") (45-682-292)
- Esperanza ERW019 -näyttöteline / -jalusta 68,6 cm (27) työpöytä musta
- Näyttöteline Gembird MA-D2-02, pöytänäyttövarsi, enimmäiskantokyky 9 kg
- Näyttöteline TRACER Pivot Master TRAUCH47659 — korkeussäädettävä, kallistettava/käännettävä, VESA 100×100, enintään 9 kg, 13–32" näytöille, pöytäasennus, musta