Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

Kattoharja KWB 608030 2,5 cm

Kattoharja KWB 608030 2,5 cm
Kattoharja KWB 608030 2,5 cm
Kattoharja KWB 608030 2,5 cm
Kattoharja KWB 608030 2,5 cm
Kattoharja KWB 608030 2,5 cm
Kattoharja KWB 608030 2,5 cm
20,83 €
PDF
PDF
Varasto 19 Tuotekoodi 2214993 Malli 608030 Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika maanantai 14. joulukuuta
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

Kuvaus

The KWB 608030 cup brush has a 2.5 cm diameter and a 6 mm shank. Constructed with crimped HSS steel wire, this tight corner end brush is designed for derusting, cleaning and removal of surface coatings such as paint and excess rubber. It is suitable for working on metal and stone and for accessing difficult shapes and interior surfaces including cast iron gates, grilles and gratings.

Advantages

Crimped HSS steel wire provides effective material removal while maintaining wire stability; the compact 2.5 cm cup size and tight profile allow access to confined or complex areas; 6 mm shank fits common rotary tools and hand-held machines; robust construction supports repeated use on abrasive tasks such as descaling, smoothing and matt finishing.

Suitable for

Key specifications

How to use

Mount the cup brush securely in a compatible rotary tool or drill with a 6 mm chuck. Start at low speed to align the brush and then increase speed as appropriate for the material and task. Apply light, even pressure and move the brush across the surface to remove rust, paint or deposits; avoid excessive force to prevent wire breakage and damage to the workpiece. For interior shapes and narrow areas, work incrementally and reposition the tool to reach confined spots.

Recommendations

Use personal protective equipment including eye protection, gloves and a dust mask. Check the brush before each use for loose wires or damage and replace if necessary. Match brush speed to the tool and the material; consult the rotary tool manual for maximum safe RPM for 2.5 cm cup brushes and observe safe operating practices.
Tärkeimmät ominaisuudet
  • Removing rust and loose paint from metal surfaces
  • Cleaning and descaling stone and metal parts
  • Preparing surfaces for painting or coating by roughing up and matt finishing
  • Working inside narrow or curved shapes such as grilles, gratings and cast-iron gates
  • Brand: KWB
  • Model / MPN: 608030
  • EAN: 4009316080306
  • Brush type: Cup brush, tight corner end
  • Wire material: HSS steel, crimped
  • Brush diameter: 2.5 cm
  • Shank diameter: 6 mm

Tekniset tiedot

Tekniset tiedot
Halkaisija
25 mm
Harjasten materiaali
Metalli
Langan paksuus
0.3 mm
Sopii materiaaleille
Metalli, kivi
Tyyppi
Kuppiharja
Varren halkaisija
6 mm
Hintahistoria viimeisen 6 kuukauden ajalta
Kattoharja KWB 608030 2,5 cm
Nykyinen
20,83 €
Alin 7 pv
20,57 €
Ylin 7 pv
20,83 €
Muutos 24 h
+0,26 €   +1%
Muutos 7 pv
+0,26 €   +1%
Muutos 30 pv
0,00 €   0%

Kirjoita arvostelu

Arvosana *
Nimesi näytetään julkisesti – voit käyttää nimimerkkiä. Kutsumme ostajia kirjoittamaan arvosteluja; tarkistamme arvostelut ennen julkaisua ja julkaisemme myös kriittiset.

Lisää KWB-tuotteita tässä kategoriassa

12
Myyjä: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
WhatsApp
Messenger
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.
Kaikki kategoriat