Keskeytymätön virransyöttö PowerWalker VI 1000 CSW IEC

The PowerWalker VI 1000 CSW IEC is a line-interactive uninterruptible power supply (UPS) designed for home and office use. It delivers a pure sinewave output and includes AVR (automatic voltage regulation) to maintain stable voltage during outages and fluctuations. The UPS provides 1 kVA / 600 W capacity, eight IEC C13 AC outlets, an LCD display, two front USB charging ports (2.1 A) and an easily accessible front battery compartment for quick replacement.

Advantages

The VI 1000 CSW IEC combines line-interactive topology with pure sinewave output for compatibility with sensitive electronics. Integrated AVR reduces the impact of voltage dips and surges without switching to battery, while USB HID and USB communication allow monitoring and control with or without dedicated software. The compact tower design and front-access battery compartment simplify installation and maintenance.

Suitable for

• Home and small office workstations
• Gaming and entertainment systems
• Network-attached storage (NAS) and small servers
• Peripheral devices requiring clean sinewave power

Key specifications

• Output power capacity: 1 kVA
• Output power: 600 W
• AC outlets: 8 × IEC C13
• Battery: 10 Ah (recharge time ~8 hours)
• Form factor: compact tower (W 99 mm × D 288 mm × H 280 mm)
• Weight: 8.5 kg
• Product colour: Black

How to use

Place the UPS on a stable, ventilated surface and connect your devices to the IEC C13 outlets. Plug the UPS into a grounded mains outlet to charge the internal battery before use. Use the LCD display for status and basic configuration. For advanced monitoring and automatic shutdown, connect via USB to a computer and install compatible UPS management software or use HID mode for basic communication without drivers. Replace the battery through the front access compartment following the manufacturer’s safety instructions.

Recommendations

To ensure continuous protection, allow the battery to fully charge after initial setup and test the UPS under load to verify runtime. Avoid placing the UPS in direct heat or humid environments and perform battery replacement when indicated by the LCD or monitoring software.