Keskeytymätön virransyöttö PowerWalker VI 600 STL

The PowerWalker basic VI 600 STL is a line-interactive UPS providing 0.6 kVA (360 W) of output power in a compact tower design. It protects connected equipment from power failures and voltage disturbances, offers a USB HID interface for easy communication with operating systems, and includes an auto-dimming LCD panel with a multifunctional button for status viewing and basic control.

Advantages

The UPS combines line-interactive topology with passive cooling to deliver reliable voltage regulation and backup power without the need for active ventilation. It supports communication via a USB port with HID support for immediate compatibility with common operating systems. The advanced LCD with auto-dimming and a multifunctional button provides clear status information, alarm mute and output control while keeping the unit compact and affordable.

Suitable for

• Home office PCs and workstations
• Modems, routers and small network devices
• Point-of-sale terminals and small office equipment
• Peripheral devices that require short-term backup during outages

Key specifications

• Output power capacity: 0.6 kVA (360 W)
• Battery: 12 V, 7 Ah
• AC outlets: 2 × Type F
• USB: 1 × USB 2.0 with HID support
• Typical backup time: ~5 minutes at 50% load
• Form factor: Tower; Cooling: passive
• Colour: Black; Brand: PowerWalker; MPN: 10121072; EAN: 4260074980677

How to use

Place the UPS on a stable, level surface with adequate ventilation and connect your critical devices to the two Type F outlets. Plug the UPS into a grounded mains socket and allow the internal battery to charge fully before relying on backup operation. Use the USB connection to install PowerWalker PowerMaster or let the operating system detect the HID device for automatic shutdown and monitoring. Use the LCD and multifunctional button to view status, mute alarms or control the output as needed.

Recommendations

For reliable performance, perform periodic battery tests and replace the battery according to the manufacturer’s guidance. Avoid placing the UPS in direct sunlight, near heat sources or in humid environments. Connect only essential devices within the 360 W limit to ensure expected backup time.