Kingston Technology KTD-PE432E/16G muisti 16 GB 1 x 16 GB DDR4 3200 MT/s 288-Pin DIMM ECC

The Kingston KTD-PE432E/16G is a 16 GB DDR4 memory module with a 288-pin DIMM form factor, designed for use in PCs and servers. Operating at 3200 MHz with ECC support and a CAS latency of 22, this Kingston memory module is built and tested to meet brand-name system specifications and to provide reliable performance and data integrity.

Advantages

ECC support helps detect and correct single-bit memory errors to improve system stability. The 3200 MHz clock speed and 16 GB capacity support improved multitasking and workload handling. The 288-pin DIMM design and standard 1.2 V operating voltage ensure compatibility with many modern motherboards and server platforms.

Suitable for

• Workstations and desktop PCs requiring error-correcting memory
• Entry to mid-range servers and rack systems
• Applications with moderate to heavy multitasking and memory-intensive tasks

Key specifications

• Capacity: 16 GB
• Type: DDR4
• Speed: 3200 MHz
• Form factor: 288-pin DIMM
• ECC: Yes
• CAS latency: 22
• Voltage: 1.2 V
• Manufacturer part number (MPN): KTD-PE432E/16G
• EAN: 0740617326741

How to use

Power down the system and disconnect it from the mains before installing the memory module. Open the computer or server chassis, locate the appropriate DIMM slot compatible with DDR4 ECC memory, align the module with the slot notch, and press firmly until the retaining clips engage. Reassemble the chassis, reconnect power, and verify that the system BIOS/UEFI recognizes the new 16 GB module and that ECC functionality is enabled if required.

Recommendations

Install memory modules in matched pairs or according to the motherboard’s supported configurations for optimal performance. Check the system or motherboard documentation for supported memory speed, ECC support, and maximum capacity. Always handle modules by the edges and use anti-static precautions during installation.