Koaksiaalikaapeli Roland RCC-25-SDI

The Roland RCC-25-SDI is a 7.5 m coaxial cable with BNC connectors on both ends, designed for reliable transmission of HD video and RF signals. It uses a 20 AWG core for stable signal transfer, high-density braided shielding to reduce interference, and heavy-duty polyethylene insulation for mechanical durability. The cable is intended for professional video setups requiring consistent signal quality.

Advantages

The cable's 20 AWG conductor provides precise signal carrying capacity while the dense braided shield minimizes electromagnetic interference and prevents contamination. High-quality BNC connectors ensure secure connections and signal integrity, and the polyethylene insulation adds resistance to wear in demanding environments.

Suitable for

Key specifications

How to use

Connect one BNC connector to the SDI output of your camera or source device and the other BNC connector to the SDI input of your monitor, recorder, or switcher. Ensure connectors are pushed in and rotated if required until they lock securely. Route the cable to avoid sharp bends and excessive tension; secure with cable ties or clamps as needed. For best results, keep cable runs within recommended lengths for SDI signals and avoid running parallel to high-power electrical cables.

Recommendations

Use the Roland RCC-25-SDI in professional video environments where stable HD-SDI transmission is required. Inspect BNC connectors periodically for debris and tighten connections as necessary. Replace the cable if internal damage or significant signal degradation is observed.