Kolink Inspire K5 ARGB Midi Tower -kotelo, musta

The Kolink Inspire K5 ARGB Mid-Tower is a gaming PC case with a tinted tempered glass side panel, a striking front panel illuminated by a digitally addressable RGB-LED strip, and a pre-installed 120mm ARGB rear fan. The chassis supports ATX, Micro-ATX and Mini-ITX motherboards and provides room for multiple storage drives and high-performance components, while a PSU shroud helps with cable management.

Advantages

The front panel design with an integrated ARGB strip and the pre-installed ARGB fan provide coordinated case lighting that can be controlled via the built-in controller button or connected to a compatible motherboard. The tinted tempered glass side panel offers a clear view of internal components. The mid-tower layout accepts long graphics cards and tall CPU coolers, and the PSU shroud plus side cover improve cable routing and internal neatness.

Suitable for

• Gaming PC builds using ATX, Micro-ATX or Mini-ITX motherboards
• Compact high-performance systems with dedicated graphics cards
• Systems with multiple 2.5" and 3.5" storage drives

Key specifications

• Form factor: Mid-Tower (Midi Tower)
• Supported motherboard sizes: ATX, Micro-ATX, Mini-ITX
• Dimensions (approx.): 205 mm (W) x 410 mm (D) x 440 mm (H)
• Pre-installed cooling: 1 x 120 mm ARGB rear fan
• Fan support: up to three 120 mm fans in front, two 120 mm fans on PSU shroud
• Radiator support: front up to 240 mm, rear 120 mm
• Maximum GPU length: 310 mm
• Maximum CPU cooler height: 160 mm
• Drive bays: two 3.5" and two 2.5" (under PSU shroud and rear of tray)
• Front I/O: 1 x USB 3.0 (Type-A), 1 x USB 2.0 (Type-A), audio ports
• Materials: tempered glass side panel, steel and plastic body
• Colour: black
• Weight (approx.): 5.5 kg

How to use

Install a compatible ATX, Micro-ATX or Mini-ITX motherboard, mount storage drives in the dedicated 3.5" or 2.5" locations and fit the power supply in the bottom compartment. Position the graphics card (up to 310 mm) and CPU cooler (up to 160 mm) according to the available clearances. Connect the ARGB lighting and rear fan either to the included controller button on the I/O panel or to a 3-pin ARGB header on the motherboard for synchronized lighting control. Route cables behind the motherboard tray and use the PSU shroud to keep the main chamber tidy.

Recommendations

For best cooling and dust management, use the front fan positions with a 240 mm radiator or up to three 120 mm fans and ensure front and rear ventilation is not obstructed. Connect ARGB components to the motherboard header when available for unified lighting control.