Kuitu-lähetin-vastaanotinmoduuli BlueOptics 2682450000-BO 155 Mbit/s SFP

The BlueOptics 2682450000-BO 155 Mbit/s SFP is a fiber optic transceiver module designed for use in small form-factor pluggable (SFP) network ports. With a maximum data transfer rate of 155 Mbit/s and a compact silver housing, this module provides a standardized optical interface for connecting switches, routers and other network equipment over fiber. The transceiver's construction and rated MTBF of 1,000,000 hours indicate suitability for continuous network operation where stable fiber links are required.

Advantages

The module supports a common SFP form factor allowing hot-plug installation and broad compatibility with equipment that accepts SFP transceivers. Its modest power and compact design make it suitable for high-density equipment bays, while the silver metal housing offers mechanical robustness and electromagnetic shielding. The specified MTBF reflects a design aimed at long operational life and reduced maintenance intervals.

Suitable for

• Connecting switches and routers over single-mode or multimode fiber links (where compatible)
• Replacing or upgrading existing SFP ports to enable 155 Mbit/s optical connections
• Use in telecommunications or industrial networking equipment with SFP slots
• Network lab environments and test setups requiring standard SFP transceivers

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Design life indicator: Mean time between failures (MTBF) approximately 1,000,000 hours

How to use

Insert the SFP transceiver into a compatible SFP slot on a switch, router or optical interface module while the host device is powered on or off according to the host manufacturer's guidance. Connect an appropriate fiber patch cable to the transceiver's optical connector, observing correct transmit/receive orientation and any required fiber type (single-mode or multimode) supported by the equipment. Configure the host network device to recognize the link speed and optical port settings; verify link status and diagnostics through the device management interface.

Recommendations

Handle the transceiver by its housing and avoid touching the optical connector endface; keep protective dust caps in place when the module is not connected. Verify compatibility with the host equipment's supported wavelengths and fiber types before installation. For stable operation, ensure connectors are clean and that transceiver ventilation is not obstructed in high-density racks.