Kuituoptinen lähetin-vastaanotinmoduuli BlueOptics EQPT1H4WM4LCL100-BO 100000 Mbit/s QSFP28

The BlueOptics EQPT1H4WM4LCL100-BO is a QSFP28 fiber optic transceiver module designed for 100G data transmission. It supports a maximum data transfer rate of 100000 Mbit/s and uses a QSFP28 interface with an LC Duplex optical connection. The module has a robust metal housing, weighs approximately 0.04 kg, and is available in silver and blue finishes. With a mean time between failures (MTBF) of about 1,000,000 hours, this transceiver is intended for long-term deployment in high-speed network environments.

Advantages

The module offers high-speed 100G capability in a compact QSFP28 form factor, enabling dense port deployment in switches and routers. Its metal housing provides mechanical stability and thermal conduction for continuous operation. The listed MTBF indicates a long operational lifetime suitable for environments where availability is important. Lightweight construction simplifies handling and installation in patch panels or optical line cards.

Suitable for

Key specifications

How to use

Install the QSFP28 transceiver into a compatible QSFP28 port on a switch, router, storage system or other supporting hardware according to the host device manufacturer's instructions. Connect single-mode fiber with an LC Duplex patch cable to the transceiver's LC connector, ensuring correct transmit and receive alignment. Verify link status in the host device and configure network interfaces as required. Observe electrostatic discharge (ESD) precautions when handling the module and keep protective dust caps on the optical connector when not in use.

Recommendations

To maintain optimal performance, use single-mode fiber and high-quality LC Duplex patch cords, ensure proper cable polarity, and operate the transceiver within the ambient temperature and power specifications of the host hardware. Confirm that the target device supports QSFP28 modules and the required 100G protocol before deployment.