Kulmahiomakoneen lisävaruste Bosch 2 608 600 316 halkaisija 18 cm harmaa

Cutting disc for metal with a diameter of 180 mm and a thickness of 3.0 mm, designed for use with hand-held angle grinders. The disc has a 22.23 mm bore and is suitable for jobs requiring metal cutting at high circumferential speeds (maximum 80 m/s, depending on grinder rpm and disc diameter).

Advantages

The Bosch cutting disc offers a standard 22.23 mm arbor hole for compatibility with most handheld angle grinders. Its 3.0 mm thickness balances cutting speed and durability for metalwork. Rated for a maximum circumferential speed of 80 m/s, the disc meets typical safety and performance requirements when used within specified rpm limits.

Suitable for

• Cutting steel and other ferrous metals
• On-site metal fabrication and repair
• Construction and maintenance metal cutting tasks

Key specifications

• Diameter: 180 mm
• Bore diameter: 22.23 mm
• Thickness: 3.0 mm
• Maximum circumferential speed: 80 m/s (dependent on rpm and disc diameter)
• Brand: Bosch
• Manufacturer part number (MPN): 2608600316
• EAN: 3165140149389

How to use

Install the disc on a compatible handheld angle grinder with a 22.23 mm arbor, following the grinder manufacturer’s instructions. Ensure the grinder is unplugged or its battery is removed during fitting. Use appropriate guards and secure the disc according to the tool’s clamping system. Operate the grinder at speeds that do not exceed the disc’s maximum rated circumferential speed, and make controlled passes through the material.

Recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection, gloves). Inspect the disc for damage before each use and discard if cracked or deformed. Follow grinder and disc manufacturer safety instructions and never exceed the recommended rpm.