kuorintapihdit ShiverPeaks BS85000-6

The ShiverPeaks BS85000-6 cable stripper is a compact tool intended for precise removal of insulation from single-core and multi-core wires. Its design supports stripping lengths from 3 mm up to 12 mm and accepts cable diameters up to 7 mm, allowing users to prepare conductors for termination or connection with consistent results. The grey housing combines robust materials with an ergonomic shape to provide comfortable handling during repetitive tasks. Supplied as a single unit in the pack, this cable stripper is suitable for general electrical work, repair tasks and hobby projects.

Advantages

The tool provides accurate and repeatable stripping without damaging conductor strands, thanks to its adjustable stop for controlling strip length. Its compact size and straightforward operation reduce setup time and make it convenient for on-site use. The construction balances durability and lightweight handling, while the grey finish resists visible wear and keeps the tool looking clean under regular use.

Suitable for

• Stripping insulation from single-core electrical wires
• Preparing multi-core cable ends for connectors and terminals
• Electrical installation and maintenance tasks
• DIY electronics and hobbyist wiring projects

Key specifications

• Stripping length range: 3 mm to 12 mm
• Maximum stripping capacity: 12 mm
• Minimum stripping capacity: 3 mm
• Acceptable cable diameter: up to 7 mm
• Color: grey
• Pack quantity: 1 piece

How to use

Place the cable into the stripper’s jaw and adjust the stop to the required strip length. Close the tool to cut through the insulation without nicking the conductor, then pull the tool along the cable or rotate the cable as designed to remove the cut insulation cleanly. Inspect the exposed conductor to ensure no strands are damaged before making the electrical connection.

Recommendations

For best results, use the tool on cables within the specified diameter range and set the strip length carefully for the terminal or connector in use. Avoid excessive force to prevent conductor damage and periodically check the cutting edges for wear; replace the tool if stripping performance degrades.