KWB 581857 pyörösahanterä 13 cm kovapuulle muoville vanerille pehmeälle puulle

The KWB 581857 circular saw blade with a 13 cm (127 mm) diameter and a 16 mm bore is a tungsten carbide tipped blade designed for hand-held circular saws. It delivers quick, clean cuts on solid wood, laminated boards such as work surfaces and kitchen worktops, blockboard, chipboard, fibreboard and glass fibre reinforced plastics. The blade is suitable for cutting hardwood, softwood, plywood and various plastics, offering versatility for professional and DIY applications.

Advantages

Tungsten carbide tips provide extended cutting life and resistance to wear. Regular tooth geometry gives smooth, consistent cutting performance. The blade is optimized for fast, clean cuts with reduced chipping on laminated and veneered materials. Compatible with most hand-held circular saws that accept a 16 mm bore and 127 mm diameter.

Suitable for

Key specifications

How to use

Ensure the saw and blade are disconnected from power before installation. Fit the blade onto the saw arbor matching the 16 mm bore, secure the blade flange and tighten according to the saw manufacturer's torque instructions. Set the cutting depth and fence or guide as required for the material. Use steady feed speed appropriate to material density: slower for hardwood and reinforced plastics, faster for softwood and thin laminates. Always run the saw at the recommended RPM for a 127 mm blade and allow the blade to reach full speed before engaging the cut.

Recommendations

Wear appropriate personal protective equipment (eye protection, hearing protection, and dust mask). Use suitable clamps or supports to secure workpieces. Replace the blade when performance degrades or teeth show damage. Do not use the blade on materials or at speeds outside the manufacturer's specifications.