Kytkinaktuaattori Eltako FSR61-230V

The Eltako FSR61-230V is a flush-mounted switching actuator developed for smart home installations. Operating on the 868 MHz frequency band, this compact module provides reliable on/off control for electrical loads up to 2000 W. With an input voltage rating of 230–250 V and a maximum continuous current of 10 A, the unit fits into standard installation spaces and integrates with wireless control systems to automate lighting and appliances.

Advantages

The FSR61-230V combines small dimensions with high switching capacity, allowing installation behind wall switches or inside distribution boxes where space is limited. Its wireless operation at 868 MHz ensures stable communication with compatible receivers and controllers, while the 10 A current capability supports a wide range of domestic loads. The device is designed for flush mounting, offering a discreet installation without visible components.

Suitable for

Key specifications

How to use

Install the switching actuator in a suitable flush-mounted box or behind an existing switch following local electrical codes. Connect the supply live and neutral conductors and the switched load according to the electrical diagram provided by the manufacturer. After power-up, pair the device with compatible 868 MHz controllers or receivers according to the radio integration instructions. Use the paired controller, wall switch, or automation software to operate the connected load and configure timers, scenes, or remote control functions.

Recommendations

Ensure that the connected load does not exceed 2000 W or 10 A to avoid overloading. Use in dry, indoor environments and allow sufficient ventilation around the installation location. For safe installation and compliance with regulations, have a qualified electrician perform the wiring and configuration. Verify compatibility of your wireless controller or gateway with 868 MHz devices before integration.