LAPP 4520042S H07V-K 1 x 2,5 mm² punainen 100 m joustava PVC-eristetty johdin

When internal wiring demands a flexible, flame-retardant conductor that can handle 450/750 V, this LAPP H07V-K single core cable is the straightforward choice. The fine-stranded bare copper conductor and red PVC insulation make it easy to route in conduit, control panels, and equipment wiring.

Who is it for

Electricians and panel builders who need a harmonized, RoHS-compliant hook-up wire for fixed installation or occasional flexing. The 2.5 mm² cross-section suits lighting circuits, control wiring, and appliance connections.

Main features

• H07V-K harmonized type, 1 core, 2.5 mm² nominal cross-section
• Fine-stranded bare copper conductor, Class 5 flexibility
• Red PVC insulation, flame retardant to IEC 60332-1-2
• Rated voltage 450/750 V, test voltage 2500 V
• Temperature range: -30°C to +80°C fixed, +5°C to +70°C flexing
• Minimum bending radius: 4 x outer diameter fixed, 15 x outer diameter flexing
• Outer diameter approx. 3.8 mm
• 100 m length

Specifications

• Conductor material: bare copper
• Conductor class: Class 5 (fine-stranded)
• Insulation material: PVC (Polyvinyl Chloride)
• Standard: EN 50525-2-31
• Lead-free: Yes (RoHS compliant)

Tips

For fixed installation in conduits or cable ducts, keep the bending radius above 4 times the outer diameter. When flexing is required, allow at least 15 times the outer diameter to avoid stressing the conductor.