Latauskaapeli EcoFlow EFL-BKWAC-DIY — kaapeli DE-Wieland-liitäntään

EcoFlow EFL-BKWAC-DIY is a charging cable for DE‑Wieland connection designed to provide a secure wired interface between chargers and compatible devices or battery systems. Manufactured by EcoFlow, the cable is intended for environments where a DE‑Wieland plug is required and where reliable power transfer is needed for charging tasks in home, workshop or mobile setups.

Advantages

The cable offers a purpose-built DE‑Wieland connection that ensures correct mating and stable current flow during charging. Constructed with standardized connectors and insulated conductors, it reduces the risk of loose contact and supports consistent power delivery. Its design simplifies replacement or integration into existing installations that use DE‑Wieland plugs and allows straightforward wired charging without additional adapters.

Suitable for

• Charging EcoFlow-compatible battery systems and other devices with DE‑Wieland input
• Home power setups requiring a fixed wired charger connection
• Workshop or service environments where a robust, standardized connector is preferred
• Mobile or vehicle installations that use DE‑Wieland for power transfer

Key specifications

• Connector type: DE‑Wieland interface on cable
• Function: wired charging/power transfer between charger and device
• Cable construction: insulated multi‑core conductors suitable for mains/charging currents
• Intended use environment: indoor and protected mobile installations
• Compatibility: devices and chargers designed for DE‑Wieland connection

How to use

Connect the DE‑Wieland plug on the cable to the matching DE‑Wieland socket on the charger or device, ensuring correct alignment and a firm seating. Verify that the connected charger is suitable for the battery or device and that voltage and current ratings are matched. After connection, power on the charger following the charger manufacturer's instructions and monitor charging status via the device or charger indicators. Disconnect by powering off the charger first and then removing the DE‑Wieland plug by pulling on the connector body, not the cable.

Recommendations

Use the cable only with equipment rated for DE‑Wieland connections and within the voltage and current limits of the charger and device. Avoid exposing the cable to moisture, sharp edges or excessive heat, and inspect connectors periodically for signs of wear or damage. If any connector or insulation is compromised, replace the cable to maintain safe charging performance.