LD4AU032G-B3200GSST, 32 GB, 1 x 32 GB, DDR4, 3200 MHz, 288-pin DIMM

Lexar DDR4 32GB 3200MHz memory module is a 32GB DDR4 DIMM designed for desktop PCs. It operates at 3200 MHz with a CAS latency of 22 and a standard 1.2 V operating voltage, delivered in a 288-pin DIMM form factor compatible with modern motherboards supporting DDR4 memory.

Advantages

This 32GB DDR4 3200 MHz module provides high capacity for multitasking and demanding applications while maintaining energy-efficient operation at 1.2 V. The 288-pin DIMM format ensures straightforward installation in compatible desktop systems, and the module's 3200 MHz clock speed with CL22 latency balances throughput and stability for everyday computing and heavier workloads.

Suitable for

• Upgrading desktop PC memory for improved multitasking
• Workstations running memory-intensive applications (editing, virtualization)
• Gaming systems requiring larger memory capacity
• Systems that support DDR4 288-pin DIMM modules

Key specifications

• Capacity: 32 GB
• Memory type: DDR4
• Clock speed: 3200 MHz
• CAS latency: CL22
• Voltage: 1.2 V
• Form factor: 288-pin DIMM

How to use

Power off the PC and disconnect it from mains before installation. Open the desktop case, locate an empty DDR4 288-pin DIMM slot on the motherboard, align the module notch with the slot key and press firmly until the retention clips engage. Reassemble the case, reconnect power and boot the system; check BIOS/UEFI to confirm the memory is recognized and running at the desired frequency.

Recommendations

Install modules in matched pairs where the motherboard supports dual-channel operation to maximize memory bandwidth. Ensure the motherboard BIOS/UEFI is updated and configured to use the module's rated frequency and timings; if stability issues occur, try running at a lower frequency or adjusting voltage per motherboard guidance.