Lindy 47762 verkkokaapeli keltainen 1 m Cat6 S/FTP (S-STP)

The Lindy RJ-45/RJ-45 Cat6 1m Yellow S/FTP networking cable (MPN 47762, EAN 4002888477628) is a 1 metre Category 6 patch cable designed for 10/100/1000Base-T(X) networks. The cable features S/FTP shielding to reduce electromagnetic interference and crosstalk, gold-plated RJ-45 contacts for reliable mating and corrosion resistance, and a yellow outer jacket for easy visual identification. It is intended for short-run connections between network hardware such as switches, routers, patch panels and network interface cards where Cat6 performance is required.

Advantages

S/FTP shielding provides improved protection against external interference and pair-to-pair crosstalk compared with unshielded cable. Gold-plated contacts help ensure consistent low-resistance connections and improved corrosion resistance. The Cat6 specification supports Gigabit Ethernet speeds under the 10/100/1000Base-T(X) standard, and the 1 m length reduces excess cable in patching environments. The yellow jacket makes the cable easy to identify in structured cabling installations.

Suitable for

• Short patch connections between switches, routers and patch panels
• Desktop or rack-mounted network equipment
• Gigabit Ethernet deployments within offices or home networks
• Environments requiring shielded cabling to reduce electromagnetic interference

Key specifications

• Brand: Lindy
• Model / MPN: 47762
• EAN: 4002888477628
• Cable length: 1 m
• Connectors: RJ-45 to RJ-45
• Cabling technology: 10/100/1000Base-T(X)
• Shielding: S/FTP (overall braid with individually foil-shielded pairs)
• Contact plating: Gold-plated contacts
• Product colour: Yellow

How to use

Connect one RJ-45 connector to the network port of the source device (switch, router or NIC) and the other RJ-45 connector to the target device or patch panel. Ensure connectors are fully inserted until the latch clicks to secure the connection. Route the 1 m cable with minimal bending and avoid tight bends or kinks to maintain signal integrity. For rack installations, label both ends if needed for identification and patch management.

Recommendations

For best performance, avoid running the cable parallel and close to mains power lines or large electrical equipment. Use shielded connectors and properly grounded equipment in installations where S/FTP shielding is required to be effective. Replace the cable if connector damage or significant jacket wear is observed.