Microconnect B-FTP60025W verkkokaapeli valkoinen 0,25 m Cat6 F/UTP (FTP)

The Microconnect B-FTP60025W RJ-45 Cat6 0.25m White is a 0.25 m Cat6 networking cable designed for reliable high-speed connections between network devices such as switches, modems and routers or to patch panels, keystone jacks and wall outlets. The cable supports data rates up to 10000 Mbit/s and is tested to the Cat6 standard frequency of 250 MHz. It features RJ-45 connectors, an F/UTP (B-FTP) shielded design and a white finish suitable for home and office installations.

Advantages

The shielded B-FTP construction reduces electromagnetic interference (EMI) and helps prevent crosstalk, preserving signal integrity and lowering error rates. Backwards compatibility with Cat5e and Cat5 ensures interoperability with existing infrastructure. The cable includes latch protection on the RJ-45 connectors to reduce the risk of connector damage during installation in tight spaces.

Suitable for

• Short links between network devices (switch to router, router to modem)
• Connections to patch panels, keystone jacks and wall outlets
• Home and small office Ethernet and entertainment setups

Key specifications

• Cable type: RJ-45 Cat6 (B-FTP / F/UTP shielded)
• Length: 0.25 m
• Maximum data rate: 10000 Mbit/s
• Tested frequency: up to 250 MHz (Cat6 standard)
• Connectors: RJ-45 to RJ-45 with latch protection
• Colour: White
• Weight: 0.02 kg

How to use

Connect one RJ-45 end to your network device (for example switch, modem or router) and the other end to the destination device or network outlet. Ensure connectors are fully inserted until the latch clicks to secure the connection. Use the short 0.25 m length for neat, low-profile connections where devices are close together or where minimal cable slack is required.

Recommendations

For best performance, avoid running the cable alongside high-voltage power lines and keep it away from strong sources of electromagnetic interference. When connecting to patch panels or keystone jacks, verify port wiring and test the link if required to confirm expected throughput and signal quality.