Microconnect B-FTP610O verkkokaapeli oranssi 10 m Cat6 F/UTP (FTP)

The Microconnect B-FTP610O is a 10 m Cat6 networking cable with F/UTP (B-FTP) shielding and RJ-45 connectors on both ends. It supports data transfer rates up to 10000 Mbit/s and is suitable for connecting switches, modems, routers or patch panels in home and small office networks. The cable is tested to the Cat6 standard (up to 250 MHz) and is backward compatible with Cat5e and Cat5 installations. Its bright orange jacket improves visibility during installation and maintenance.

Advantages

Shielding (F/UTP) reduces electromagnetic interference (EMI) and crosstalk, improving signal integrity and reducing transmission errors. The cable meets Cat6 frequency requirements (tested up to 250 MHz) and provides backward compatibility with Cat5e/Cat5 equipment. RJ-45 connectors on both ends and latch protection help prevent connector damage during installation in confined spaces. The 10 m length offers flexibility for typical home and small office setups.

Suitable for

• Connecting switches, routers or modems to patch panels or wall outlets
• Home and small office wired Ethernet networks
• Audio/video and entertainment systems requiring stable wired connections
• Environments where improved EMI protection is needed

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: F/UTP (foil shield around pairs with overall braid not specified)
• Connectors: RJ-45 — both ends
• Length: 10 m
• Maximum data rate: up to 10000 Mbit/s
• Color: Orange
• Weight: 0.166 kg

How to use

Plug each RJ-45 connector into the corresponding network ports on devices such as switches, routers, modems or patch panels until the latch clicks. Route the cable avoiding sharp bends and sources of strong electromagnetic interference where possible. For installation through tight spaces, use the integrated latch protection to reduce the risk of connector damage. Verify link and network speed settings on connected devices after installation.

Recommendations

For optimal performance, keep cable runs within recommended lengths for your network equipment, avoid running the cable parallel and close to high-voltage power lines, and use shielded connectors and properly grounded patch panels when deploying shielded (F/UTP) cabling.