Microconnect B-UTP6015P verkkokaapeli violetti 1,5 m Cat6 U/UTP (UTP)

The MicroConnect B-UTP6015P RJ-45 Cat6 1.5m Purple is a 1.5 metre networking cable designed for reliable wired connections between network devices such as switches, modems and routers, or to structured cabling via patch panels, keystone jacks or wall outlets. It complies with the Cat6 standard, is U/UTP (unshielded) and supports data rates up to 10000 Mbit/s with a tested frequency up to 250 MHz. The cable is backward compatible with Cat5e and Cat5 and features latch protection to reduce the risk of connector damage during installation in confined spaces.

Advantages

The cable offers Cat6 performance with U/UTP construction for reduced interference, RJ-45 connectors on both ends for universal compatibility, and a compact 1.5 m length suitable for short runs. Latch protection on the connectors helps prevent breakage during routing through tight openings. The purple colour provides easy visual identification in mixed-cable environments.

Suitable for

• Connecting a router, modem or switch to a nearby device
• Home and small office network and entertainment setups
• Patch panel or keystone jack terminations in structured cabling
• Short point-to-point links where a 1.5 m cable is sufficient

Key specifications

• Length: 1.5 m
• Standard: Cat6, tested up to 250 MHz
• Maximum data rate: up to 10000 Mbit/s
• Connector type: RJ-45 to RJ-45
• Shielding: U/UTP (unshielded twisted pair)
• Colour: Purple
• Weight: 0.04 kg
• MPN: B-UTP6015P, EAN: 5711045325625

How to use

Plug each RJ-45 connector into the corresponding network port on your devices or wall outlet until the latch clicks into place. Route the cable to avoid sharp bends and pinching; ensure both ends are fully seated before establishing network communication. For structured installations, connect one end to a patch panel or keystone jack and the other to the target device.

Recommendations

Use this 1.5 m Cat6 cable for short, direct connections in home or small office environments and avoid running it near strong electromagnetic sources. Do not force the latch when inserting or removing the connector to prevent damage.