Microconnect B-UTP610W verkkokaapeli valkoinen 10 m Cat6 U/UTP (UTP)

The Microconnect B-UTP610W is a 10 m Cat6 networking cable with RJ-45 connectors on both ends, designed for high-speed data transfer up to 10000 Mbit/s. It provides U/UTP construction and meets Cat6 testing up to 250 MHz, ensuring backward compatibility with Cat5e and Cat5 installations. The white cable includes latch protection on the connectors to reduce the risk of damage during installation in confined spaces and is suitable for office, home and entertainment networking.

Advantages

Cat6 performance tested up to 250 MHz with support for data rates up to 10000 Mbit/s; RJ-45 connectors on both ends with latch protection to prevent connector damage during installation; U/UTP construction for reliable signal transmission; 10 m length and white colour for flexible placement and discreet installation in various environments.

Suitable for

• Connecting switches, routers or modems to patch panels, keystone jacks or wall outlets
• Small office and home network cabling
• Home entertainment systems and multimedia devices
• Upgrading existing Cat5e/Cat5 runs to Cat6 performance where cable run length permits

Key specifications

• Product name: Microconnect B-UTP610W
• Cable category: Cat6 (tested up to 250 MHz)
• Length: 10 m
• Connectors: RJ-45 to RJ-45 with latch protection
• Maximum data rate: up to 10000 Mbit/s
• Shielding: U/UTP
• Colour: White
• Weight: 0.146 kg
• MPN: B-UTP610W
• EAN: 5711045333668

How to use

Connect one RJ-45 connector to your network device (switch, router or modem) and the other RJ-45 connector to the target device, patch panel or wall socket. Ensure connectors click into place using the latch protection, route the cable avoiding sharp bends and electrical interference, and secure it with cable ties or clips if necessary. For best performance, keep cable lengths within recommended limits for Ethernet and avoid running parallel to power cables.

Recommendations

Use the Microconnect B-UTP610W cable for indoor installations. Avoid exposure to moisture and direct sunlight. When installing in tight spaces, confirm the latch protection engages properly to prevent connector damage, and test the link with a network tester after installation to verify performance and continuity.