Microconnect B-UTP615B verkkokaapeli sininen 15 m Cat6 U/UTP (UTP)

The Microconnect B-UTP615B RJ-45 Cat6 15m Blue is a 15-meter U/UTP Cat6 networking cable designed for reliable high-speed connections between network devices such as switches, modems, routers, patch panels and keystone jacks. It supports data rates up to 10000 Mbit/s and is tested to the Cat6 standard frequency of 250 MHz. The cable is backwards compatible with Cat5e and Cat5 installations and is finished in blue for easy identification.

Advantages

This Cat6 cable provides shielded U/UTP construction to reduce electromagnetic interference and maintain signal integrity over longer runs. Both ends are fitted with standard RJ-45 connectors for plug-and-play compatibility with common networking equipment. The cable includes latch protection on the connectors to prevent damage when routing through tight installation spaces. Lightweight and flexible, it is suitable for structured cabling in small offices and home networks.

Suitable for

• Connecting switches, routers and modems to patch panels or wall outlets
• Home and small office wired Ethernet installations
• High-speed data transfer for media streaming and gaming
• Upgrading existing Cat5e/Cat5 cabling to Cat6 performance

Key specifications

• Length: 15 m
• Standard: Cat6, tested to 250 MHz
• Maximum data rate: up to 10000 Mbit/s
• Connectors: RJ-45 — both ends
• Shielding: U/UTP
• Colour: Blue
• Weight: 0.31 kg

How to use

Route the cable between devices and termination points, ensuring connectors are fully inserted into RJ-45 ports until the latch clicks. When passing the cable through confined spaces, protect the connector latch and avoid sharp bends that could stress the internal conductors. For permanent installations, secure the cable along its route and terminate at patch panels or keystone jacks as required by your network layout.

Recommendations

For optimal performance, avoid running the cable parallel to high-voltage power lines and keep bend radius within manufacturer guidelines. Use shielded connectors and proper grounding practices when integrating into environments with significant electromagnetic interference.