Microconnect B-UTP620G verkkokaapeli vihreä 20 m Cat6 U/UTP (UTP)

The Microconnect B-UTP620G RJ-45 Cat6 20m Green is a 20-metre unshielded twisted pair (U/UTP) networking cable designed for reliable wired connections between network devices such as switches, modems and routers, or to structured cabling via patch panels, keystone jacks or wall outlets. Compliant with the Cat6 standard and tested up to 250 MHz, the cable supports high-speed data transfer up to 10000 Mbit/s while remaining backward compatible with Cat5e and Cat5 installations. The bright green jacket provides clear visual identification in office or home environments.

Advantages

This Cat6 networking cable offers tested performance up to 250 MHz and supports gigabit and higher data rates, with RJ-45 connectors on both ends for plug-and-play installation. The U/UTP construction reduces external interference in typical office and home environments, and the connector latch protection helps prevent damage to the plug during installation in tight spaces. At 20 m length, the cable is suitable for many local wiring runs without additional intermediate hardware.

Suitable for

• Connecting switches, routers and modems to end devices
• Patch panel to wall jack or keystone jack connections
• Small office and home network cabling
• Wired entertainment systems and media devices

Key specifications

• Length: 20 m
• Standard: Cat6, tested to 250 MHz
• Data rate: up to 10000 Mbit/s
• Connectors: RJ-45 to RJ-45
• Cabling technology: 10/100/1000Base-T(X)
• Shielding: U/UTP (unshielded twisted pair)
• Colour: Green
• Weight: 0.5 kg

How to use

Route the Microconnect Cat6 cable between the two network points ensuring the cable is not sharply bent or pinched. Insert RJ-45 connectors into the respective ports on switches, routers, modems or wall outlets until the latch clicks. For wall-mounted installations, feed the cable through patch panels or keystone jacks as required. Verify network link and speed on connected devices after installation.

Recommendations

For optimal performance, keep cable runs below local maximum distances for Ethernet standards, avoid running the cable in parallel with high-voltage power lines, and test connections after installation. Use the bright green colour to label or separate this run from other cabling for easier maintenance.