Microconnect MC-SFTP6A02R verkkokaapeli punainen 2 m Cat6a S/FTP (S-STP)

The MicroConnect MC-SFTP6A02R is a Cat6a S/FTP patch cable designed for high-speed networking. With a 2 m length and red jacket, this cable supports data rates up to 10 000 Mbit/s and bandwidths up to 500 MHz, making it suitable for demanding 10Gbit environments. The cable uses gold-plated RJ-45 connectors and meter markings on the boot for easy length identification.

Advantages

This Cat6a S/FTP cable provides enhanced protection against electromagnetic interference thanks to its S/FTP shielding. Gold-plated RJ-45 connectors and 50μ" contacts ensure reliable connectivity and reduced signal loss. The connector latch protection reduces the risk of clip breakage, and the meter marking on the boot simplifies cable management and installation.

Suitable for

• 10Gbit Ethernet connections
• High-bandwidth LAN installations
• Data centres and server racks
• Home and office networks requiring shielded cables

Key specifications

• Standard: Cat6a
• Shielding: S/FTP
• Connector type: RJ-45 to RJ-45
• Length: 2 m
• Data rate: up to 10 000 Mbit/s
• Bandwidth: up to 500 MHz
• Contacts: gold-plated, 50μ"
• Colour: Red
• Weight: 0.06 kg

How to use

Connect one RJ-45 end of the MicroConnect MC-SFTP6A02R to a network port on your switch, router, patch panel, or network device and the other end to the corresponding port on the receiving device. Ensure connectors are fully inserted until the latch clicks and route the cable to avoid sharp bends. Use the meter marking on the boot to confirm cable length during installation and label if required for documentation.

Recommendations

For optimal performance, avoid tight bends and heavy compression of the cable; maintain recommended bend radius for Cat6a cables. In environments with high electromagnetic interference, verify proper grounding of connected equipment to complement the cable's S/FTP shielding.