Microconnect SFTP7075 verkkokaapeli harmaa 7,5 m Cat7 S/FTP (S-STP)

The Microconnect SFTP7075 RJ-45 Cat7 7.5 m Grey is a shielded network patch cable designed for reliable, high-speed connections between network devices such as switches, routers, modems and structured cabling via patch panels, keystone jacks or wall outlets. The cable supports Cat7 standard testing up to 600 MHz and is fitted with RJ-45 Cat6a-compatible connectors for broad backward compatibility with Cat6a, Cat6, Cat5e and Cat5 installations. Its grey jacket and 7.5 m length make it suitable for office or home networks and entertainment setups.

Advantages

The SFTP construction (shielded/foiled twisted pair) reduces electromagnetic interference (EMI) and crosstalk, improving signal integrity and reducing transmission errors. Tested up to 600 MHz to meet Cat7 performance, the cable uses RJ-45 connectors that ensure compatibility with common network equipment. A built-in strain relief (snagless) on the connector protects the clip during installation in confined spaces and helps prolong connector life.

Suitable for

• Connecting switches, routers and modems to patch panels or wall outlets
• Wired home networks and small office LANs
• High-bandwidth applications such as streaming, gaming and large file transfers
• Installations requiring reduced EMI and improved signal stability

Key specifications

• Standard: Cat7 (tested up to 600 MHz)
• Shielding: S/FTP (overall shield + foil around each pair)
• Connectors: RJ-45 – Cat6a compatible
• Length: 7.5 m
• Colour: Grey
• Weight: 0.03 kg

How to use

Insert an RJ-45 connector into the network device port or wall outlet until the clip clicks into place. Use the cable to link switches, routers, modems or patch panels as required by your network layout. Route the cable to avoid sharp bends and excessive tension; the snagless strain relief protects the connector when feeding the cable through tight openings.

Recommendations

For best performance, avoid routing the cable parallel to high-voltage power lines and keep bend radius above the manufacturer’s recommended minimum. Use Cat7-rated patch panels or keystone jacks when possible to preserve shielding continuity and achieve optimal EMI protection.