Microconnect SSTP607Y verkkokaapeli keltainen 7 m Cat6 S/FTP (S-STP)

The MicroConnect SSTP607Y S/FTP Cat6 networking cable is a 7 m yellow patch cable that connects devices such as switches, modems or routers to each other or to structured cabling via patch panels, keystone jacks or wall outlets. It meets the Cat6 standard and is tested to 250 MHz, is backwards compatible with Cat5e and Cat5, and includes latch protection to reduce the risk of connector damage during installation in tight spaces. The cable has S/FTP shielding to protect against electromagnetic interference and help maintain reliable data transmission.

Advantages

S/FTP shielding reduces EMI and crosstalk, improving signal integrity and lowering error rates. Cat6 performance tested to 250 MHz supports high-speed network links and is compatible with existing Cat5e/Cat5 installations. Latch protection increases durability during installation and handling. The 7 m length and bright yellow colour simplify routing and identification in racks and cabling runs.

Suitable for

• Connecting switches, routers and modems to network infrastructure
• Patch panel and wall outlet installations in offices and homes
• Small office and home entertainment networks

Key specifications

• Standard: Cat6, tested to 250 MHz
• Shielding: S/FTP (overall shield with individually foil‑shielded pairs)
• Maximum supported transfer rate: up to 10000 Mbit/s (depending on network equipment)
• Length: 7 m
• Colour: Yellow
• Weight: 0.14 kg

How to use

Connect one RJ45 end of the MicroConnect SSTP607Y cable to your network device (switch, router or modem) and the other end to the patch panel, keystone jack or wall outlet. Ensure connectors are fully seated until the latch clicks to secure the connection. Route the cable to avoid sharp bends and sources of strong electromagnetic noise for optimal performance.

Recommendations

For best results, use this S/FTP Cat6 cable in environments where EMI is a concern or where reliable high-speed connections are required. Avoid running the cable parallel to high-voltage power lines and verify compatibility with your network equipment to achieve the expected transfer rates.