Microconnect USB3.2CC3 USB-kaapeli USB 3.2 Gen 2 (3.1 Gen 2) 3 m USB-C musta

The MicroConnect USB3.2CC3 is a 3 m USB-C to USB-C cable using USB 3.2 Gen 2 specification. It supports data transfer rates up to 20 Gbit/s, Power Delivery up to 100 W (20 V / 5 A) and can carry video signals up to 3840x2160 (4K) at 60 Hz when both connected devices support the required Alternate Mode. The cable has a black finish and is intended for high-speed data, charging and video connections between USB-C devices.

Advantages

This USB 3.2 Gen 2 cable provides up to 20 Gbit/s data transfer, PD100W power delivery and 5 A charging capability in a single USB-C to USB-C lead. It supports 4K@60Hz video output where device hardware allows Alternate Mode, and its 3 m length offers increased reach for desktop or AV setups. The cable uses USB-C connectors on both ends for broad device compatibility.

Suitable for

• High-speed file transfers between computers and storage devices
• Charging laptops and power-hungry USB-C devices up to 100 W
• Connecting USB-C monitors or docks that accept 4K@60Hz input (with compatible devices)
• General USB-C device connections at a 3 m working distance

Key specifications

• Connector: USB-C to USB-C
• USB version: USB 3.2 Gen 2 (3.1 Gen 2)
• Maximum data rate: 20 Gbit/s
• Power Delivery: up to 100 W (20 V / 5 A)
• Video capability: up to 3840x2160 (4K) @ 60 Hz (when supported by devices)
• Cable length: 3 m
• Colour: Black
• Weight: 0.08 kg

How to use

Connect one end of the cable to the USB-C port of the host device (computer, laptop, dock or charger) and the other end to the target device (external drive, monitor, phone or laptop). For maximum data throughput and 4K video, ensure both devices support USB 3.2 Gen 2 and the required Alternate Mode. For high-wattage charging, use a power adapter and device that support USB Power Delivery up to 100 W (20 V / 5 A). If a device does not support a particular feature, the cable will operate at the highest mutually supported mode.

Recommendations

To achieve advertised speeds and power delivery, use with devices and power adapters that explicitly support USB 3.2 Gen 2 and PD100W; avoid excessive bending near the connectors and inspect connectors for debris before use.