Microconnect UTP603W verkkokaapeli valkoinen 3 m Cat6 U/UTP (UTP)

The Microconnect UTP603W is a 3 m white Cat6 UTP networking cable with RJ-45 connectors at both ends. Designed for wired connections between switches, routers, modems and wall outlets or patch panels, the cable supports Cat6 performance up to 250 MHz and is backward compatible with Cat5e and Cat5 infrastructure. With U/UTP construction it reduces external interference and provides data transfer capability up to 10000 Mbit/s for small office, home and entertainment networks.

Advantages

This Cat6 cable offers tested performance to 250 MHz, backwards compatibility with earlier Ethernet standards and a 3 m length suitable for typical desk and shelf-to-device connections. The RJ-45 connectors include boots (snaggles) to protect the clip during installation in tight spaces, and the U/UTP shielding helps minimise electromagnetic interference for stable, high-speed data transmission.

Suitable for

• Connecting switches, routers and modems to patch panels or wall outlets
• Home networks and small office wired installations
• Streaming and entertainment devices requiring stable wired connections

Key specifications

• Standard: Cat6, tested to 250 MHz
• Length: 3 m
• Connectors: RJ-45 to RJ-45
• Data rate: up to 10000 Mbit/s
• Shielding: U/UTP
• Colour: White
• Weight: 0.12 kg

How to use

Connect one RJ-45 connector to the network device (switch, router or modem) and the other connector to a patch panel, keystone jack or wall outlet. Route the cable avoiding tight bends and sharp edges; use the protective boot when pulling the cable through narrow installation spaces to prevent damage to the connector clip. Verify link lights on connected devices and test throughput if required.

Recommendations

For best performance, keep cable runs below recommended maximum lengths for Cat6 in structured cabling and avoid running near sources of strong electromagnetic interference such as large power cables or transformers.