Näytönsuoja Spigen AGL03385 iPhone 13 / iPhone 13 Pro

Tempered glass with a revolutionary installation - if you have been terrified of this aspect so far using tempered glass, your problems have just been solved! The tempered glass was protected perfectly cut to the front part of the phone with a mounting frame, thanks to which you can perfectly position them on the screen. The manufacturer has simplified the method of assembly to such an extent that it is fully intuitive for every user. Glas.tr ez Fit is a 0.2mm thick coating, which in the production and hardening process has been hardened to a hardness of 9h. This makes it resistant to scratches even in contact with the keys or a knife. The glass was covered with an oleophobic and hydrophobic layer, which prevents leaving fingerprints or other impurities on the screen. It is crystal transparent and perfectly reflects the displayed colors. It also does not affect the sensitivity of the touch and has exceptional smoothness, thanks to which the finger on the screen becomes a pleasure. The glass is dedicated in particular to protect the screen against scratches and minimizes the risk of screen damage during an unexpected fall. * The glass /foil is cut only on the flat part of the display with a highlighted structure, in accordance and based on the prepared cutter by the manufacturer of a given phone model himself. Only such a cutting of foil /glass will ensure complete compatibility with our protective accessories. ** Due to the various milling of display edges, after installing the film /protective glass on the screen, a delicate air aerial can be created around the screen. This is a natural and dependent situation on the screen itself. Instructions for assembly: 1) Start assembly in the bathroom just after bathing - the water vapor will absorb all dust from the atmosphere and it will not prevent you from installing .2) Wyczyść dokładnie i odtłuść powierzchnię ekranu, a następnie przy pomocy suchej ściereczki wypoleruj ją na błysk.3) Nałóż na przednią część telefonu ramkę z odplombowanym szkłem.4) Zdejmij ramkę wraz with safety foil. Get rid of air bubbles, properly pressing the whole with circular motions for several dozen seconds. Do it so that the adhesive layer is associated with the screen as much as possible. Product features: - 100% original - packed in the original packaging - exceptional ease of installation for Mounting frame case - hardness 9H - milled edges 2.5D pleasant to the touch - additional olephobic layer - perfect transparency - does not affect the functionality of the touch -Dimensions: 143x68mm The set includes: 2 x glass Spigen Glas.tr ez Fit 1 x installation kit < br /> Producer: Spigen | Device Brand: Apple | Product type: Hardened Glass | Device model: iPhone 13

How to use

Clean the phone screen thoroughly following the included wet and dry wipes and dust-removal sticker. Place the alignment tray over the phone, align it to the device edges, then position the glass protector into the tray. Press the center of the tray to allow the tempered glass to adhere; any remaining bubbles can be smoothed outward with gentle pressure. If necessary, lift and re-seat the protector while using the tray for proper alignment.

Recommendations

For best results, install the protector in a dust-free environment and ensure the screen is completely clean before applying. Use the included alignment tray to minimize repositioning and to achieve accurate placement on iPhone 13 and iPhone 13 Pro models.