Patriot Viper Gaming RGB XTREME 5 DDR5-6000 RAM, CL 30, Intel XMP 3.0 - 48GB Dual-Kit, hopea

The Patriot Memory Viper Xtreme 5 RGB 48 GB DDR5 6000 MHz is a 48 GB DDR5 DIMM module designed for desktop and server systems that require high-capacity, high-frequency memory. This 288-pin module operates at an effective frequency of 6000 MHz with a CAS latency of 30 and implements On-Die ECC for improved single-bit error correction and detection of multi-bit errors. The module is available with an all-silver heatspreader and integrates RGB lighting compatible with major motherboard control software and vendor RGB apps.

Advantages

This memory module combines high density and DDR5 performance to support multitasking and memory-intensive applications. On-Die ECC increases stability and data integrity while the integrated power management IC helps maintain reliable operation at high frequencies and varied voltage settings. The aluminum heatspreader provides passive cooling and a consistent thermal interface, and the RGB lighting enables system-wide visual synchronization with supported software.

Suitable for

• High-performance desktop systems and workstations
• Content creation workflows with large memory footprints
• Multitasking and virtualization on consumer or prosumer platforms
• Systems requiring aesthetic RGB integration

Key specifications

• Capacity: 48 GB (single module)
• Memory type: DDR5
• Form factor: 288-pin DIMM
• Effective frequency: 6000 MHz
• CAS latency: 30
• On-Die ECC support for single-bit error correction
• Operating voltages: 1.1 V, 1.2 V, 1.3 V, 1.35 V
• Heatspreader material: aluminum (silver finish)
• Weight: approximately 0.049 kg
• RGB lighting compatible with major motherboard RGB control software

How to use

Install the Patriot Viper Xtreme 5 RGB module into an available 288-pin DDR5 DIMM slot on a compatible motherboard, following the motherboard manufacturer’s guidance on slot population and dual-channel configurations. Ensure the system is powered off and disconnected from mains before installation. After physically seating the module and securing the latches, power on the system and enter the BIOS/UEFI to confirm the memory is detected. If desired, enable Intel XMP 3.0 or the motherboard’s memory profile to apply rated timings and frequency, and use the motherboard RGB software or the Viper RGB application to configure lighting effects.

Recommendations

For stable operation at higher frequencies, pair this module with a compatible motherboard and CPU that support DDR5 6000 MHz operation and, when overclocking, monitor temperatures and system voltages. Use matched modules in kits for optimal channel interleaving and memory performance. When using RGB synchronization, ensure RGB control software is up to date and compatible with your motherboard vendor to avoid conflicts.