PLA filamentti FlashForge HS 1,75 mm harmaa 1 kg - 3D-tulostusfilamentti

PLA Filament FlashForge HS 1.75 mm Grey 1 kg is a polylactic acid (PLA) filament supplied on a 1 kg spool designed for FDM/FFF 3D printers that accept 1.75 mm feed. The material offers good dimensional stability, low tendency to warp, and a smooth surface finish, making it suitable for prototypes, display models and functional household parts where ease of printing and a biodegradable polymer are preferred.

Advantages

PLA Filament FlashForge HS provides consistent diameter and reliable extrusion for most consumer and prosumer 3D printers using 1.75 mm filament. The grey colour delivers neutral, printable surfaces that take paint and post-processing well. PLA chemistry results in lower printing temperatures and reduced odor compared with many engineering plastics, improving printability and first-layer adhesion while minimizing deformation.

Suitable for

• Concept and functional prototypes
• Architectural and presentation models
• Household items, brackets and fixtures with modest mechanical loads
• Educational projects and hobbyist prints
• Parts intended for easy finishing, painting or gluing

Key specifications

• Material: Polylactic acid (PLA)
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg net filament
• Colour: Grey
• Form: Spooled filament for FDM/FFF printers

How to use

Load the spool onto your printer's filament holder and feed the 1.75 mm PLA filament through the extruder according to the printer manufacturer's instructions. Typical nozzle temperatures for PLA are in the range of 190–220°C and bed temperatures, if used, are commonly 20–60°C depending on adhesion method. Calibrate extrusion multiplier and print speed for your specific printer and nozzle size to achieve consistent layer bonding and surface quality. Allow printed parts to cool before removing to reduce deformation.

Recommendations

Store the filament in a dry place or sealed with desiccant to maintain print quality. For best results, adjust retraction and print speed settings to minimise stringing. When painting or gluing, lightly sand the surface and use appropriate primers or adhesives compatible with PLA.