3D-tulostusmateriaali Gembird 3DP-PLA-01-MTSG harmaa 1 kg 1,75 mm

Gembird 3DP-PLA-01-MTSG Grey is a 1 kg spool of 1.75 mm Polylactic Acid (PLA) filament designed for FDM/FFF 3D printers. The grey PLA offers consistent diameter and a nominal density of 1210 kg/m³ to provide stable extrusion and predictable layer bonding. The filament is suitable for printing detailed prototypes, household items, and visual models where ease of use and dimensional consistency are important.

Advantages

This PLA filament features a standard 1.75 mm diameter compatible with a wide range of desktop 3D printers. Its grey color gives good surface uniformity and hides minor imperfections in printed parts. The material's composition supports reliable feeding, reduced warping compared with more temperature-sensitive polymers, and generally requires no heated chamber. The 1 kg spool size balances print volume and storage convenience for hobbyists and small-scale production runs.

Suitable for

Key specifications

How to use

Load the filament into a compatible FDM/FFF 3D printer designed for 1.75 mm filament. Set the nozzle temperature according to your printer and slicer recommendations for PLA—typically in the 190–220 °C range—adjusting as needed for print speed and layer adhesion. Print on a clean build surface; adhesion aids such as blue tape, glue stick, or a heated bed set to a moderate temperature can be used if required. After printing, allow parts to cool before removal to reduce deformation.

Recommendations

Store the filament in a dry environment away from direct sunlight to minimise moisture absorption. If the filament shows signs of brittleness or printing issues after storage, dry it according to filament-drying guidelines before use. For best dimensional accuracy, calibrate extrusion multiplier and ensure correct filament diameter input in your slicer settings.