GEMBIRD PLA-PLUS -filamentti, oranssi, 1.75 mm, 1 kg

Gembird 3DP-PLA+1.75-02-O is a Polylactic Acid (PLA) 3D printing filament in a vivid orange color supplied on a 1 kg spool. Designed for general-purpose FDM/FFF printers, this PLA+ material offers consistent diameter and reliable feeding due to its 1.75 mm thickness and is intended for models that require good surface detail and predictable print behavior. The filament is RoHS certified and formulated for strong layer adhesion and straightforward post-processing.

Advantages

This orange PLA+ filament provides stable extrusion and good dimensional accuracy for a wide range of applications. Its composition promotes reliable layer bonding and reduced warping compared with some standard PLA variants, while maintaining ease of use for beginners. The 1.75 mm diameter is a common standard that ensures broad compatibility with most desktop 3D printers, and the 1 kg spool offers a practical balance between print volume and storage.

Suitable for

• Prototyping and visual models
• Detailed decorative prints and figurines
• Functional parts with moderate mechanical demands
• Educational projects and beginner practice

Key specifications

• Material: Polylactic acid (PLA+ formulation)
• Diameter: 1.75 mm
• Net weight: 1 kg
• Color: Orange
• Compatibility: Works with FDM/FFF 3D printers accepting 1.75 mm filament
• Certification: RoHS compliant

How to use

Load the filament into a 3D printer configured for 1.75 mm filament and verify the extruder is clean and properly tensioned. Recommended print temperature and bed settings depend on your specific printer and nozzle; start with typical PLA settings and adjust: use moderate extrusion temperatures and avoid excessively high bed temperatures to reduce the chance of deformation. Allow prints to cool gradually for best surface finish and layer adhesion. Trim the filament end cleanly before feeding to avoid jams.

Recommendations

Store the filament in a dry environment away from direct sunlight and moisture to preserve print quality. For best results, dry the spool if it has absorbed humidity before printing. Use appropriate slicer profiles for PLA+ and perform small test prints when changing print settings or switching printers.