Polymaker PolyLite PLA 3D-tulostinlanka 1,75 mm oliivinvihreä 1 kg (PA02058)

Every 3D printing enthusiast knows the frustration of brittle filament, inconsistent diameter, and warped prints. Polymaker PolyLite PLA in Olive Green solves these issues with a reliable, easy-to-print material that delivers smooth, detailed results on any FDM printer. This 1 kg spool of 1.75 mm filament is vacuum-sealed with desiccant to ensure moisture-free performance straight out of the box.

Who is it for

PolyLite PLA is ideal for makers, hobbyists, educators, and professionals who need a dependable, general-purpose filament for prototypes, models, and functional parts. Its low warping and odorless printing make it perfect for home and office environments, while the olive green colour adds a unique, earthy tone to your creations.

Main features

• High-quality Polylactic Acid (PLA) with a consistent diameter of 1.75 mm ± 0.03 mm for reliable extrusion.
• Olive green colour offers a distinctive, matte-like finish that hides layer lines well.
• Wide printing temperature range (190–230 °C) and low bed temperature requirement (25–60 °C or off) for easy setup.
• Excellent dimensional stability and low shrinkage reduce warping and curling.
• Vacuum-sealed packaging with desiccant protects filament from moisture and dust.
• Compatible with most FDM 3D printers that accept 1.75 mm filament.

Specifications

• Material: Polylactic Acid (PLA)
• Filament diameter: 1.75 mm
• Diameter tolerance: ± 0.03 mm
• Net weight: 1 kg
• Colour: Olive Green
• Recommended nozzle temperature: 190–230 °C
• Recommended bed temperature: 25–60 °C (or off)
• Recommended print speed: 40–90 mm/s
• Density: 1.17–1.24 g/cm³
• Tensile strength: 52 MPa
• Elongation at break: 6%
• Heat deflection temperature (0.45 MPa): 55 °C
• Shore hardness: D60
• Melt flow index: 9.5 g/10 min (190 °C, 2.16 kg)
• Spool type: Standard plastic spool
• Series: PolyLite

Tips

For best results, print with a nozzle temperature around 210 °C and a bed temperature of 50 °C. If you experience stringing, lower the nozzle temperature slightly or increase retraction. Store the filament in a sealed bag with desiccant when not in use to maintain print quality. Olive green PLA can be sanded, painted, or glued with standard hobby adhesives for post-processing.