PureLink USB v3.2 USB-C-kaapeli E-Markerilla 1,50m 10 Gbit/s musta

PureLink PI6000-015 is a 1.50 m passive USB-C to USB-C cable that complies with USB 3.2 (Gen 1x2) and delivers up to 10 Gbit/s. The cable uses gold-plated precision contacts and nickel-plated USB-C housings with high-purity copper conductors and triple shielding. An integrated E‑Marker chipset enables USB Power Delivery up to 5A / 20V (100W) and compatibility with DisplayPort Alt Mode for AV transmission up to 8K (UltraHD-2) at 30 Hz when supported by connected devices.

Advantages

The PureLink USB v3.2 USB-C cable combines a 10 Gbit/s data capability with an E‑Marker for negotiated power delivery, reversible USB‑C plugs and robust construction including triple shielding and gold-plated contacts. It supports simultaneous transfer of data, power and video (via DisplayPort Alt Mode) where the source and sink devices allow, and is backward compatible with older USB 2.0/1.1 standards.

Suitable for

• Connecting laptops, tablets and smartphones with USB-C ports for data transfer and charging
• Linking USB-C docks or hubs to host devices that support DP Alt Mode
• Transmitting AV signals (DisplayPort Alt Mode) up to 8K @ 30 Hz when both devices support the mode
• Charging USB-C devices with USB Power Delivery up to 100W (5A/20V) or standard charging up to 3A/5V

Key specifications

• Model: PureLink PI6000-015
• Connector: USB-C to USB-C
• Length: 1.50 m
• Data rate: USB 3.2 Gen 1x2 — up to 10 Gbit/s (USB4 Gen2x2 devices may negotiate 20 Gbit/s where supported)
• E‑Marker: yes (enables USB Power Delivery)
• Power delivery: up to 5A / 20V / 100W (with PD) — up to 3A / 5V / 15W without PD negotiation
• Display support: DisplayPort Alt Mode (DP 1.4/1.2) up to 8K @ 30 Hz
• Construction: nickel-plated housings, gold-plated contacts, high-purity copper conductors, triple shielding
• Colour: Black
• Backward compatibility: USB 2.0 / 1.1

How to use

Connect one USB-C plug to the host device and the other to the peripheral or display. For maximum data throughput ensure both endpoints support the advertised USB 3.2 or USB4 modes; for video output ensure both devices support DisplayPort Alt Mode. For high-power charging, use a power adapter and devices that support USB Power Delivery so the E‑Marker can negotiate up to 5A/20V. The reversible USB-C plugs allow insertion in either orientation.

Recommendations

Use the cable with devices and chargers that explicitly support the required USB data mode (USB 3.2 / USB4), DisplayPort Alt Mode and USB Power Delivery to achieve full performance. Avoid sharp bends and excessive pulling; store the cable without tight coils to prolong lifespan.