Puukkosahanterä Bosch S 1210 VF bimetal 30 cm 5-8 TPI

The Bosch S 1210 VF Bimetal sabre saw blade is built for general-purpose demolition and rough cutting in construction and renovation tasks. Its bimetal construction combines flexibility and wear resistance, allowing the blade to cut through wood, epoxy materials, and timber that contains nails without immediate dulling. With a usable length of 30 cm and variable tooth spacing designed for 5–8 TPI (3.2–5 mm), this blade balances cutting speed and control for coarse to medium cuts.

Advantages

The bimetal composition provides enhanced durability and resistance to breakage compared with standard high-carbon blades. Variable tooth spacing (5–8 TPI) reduces clogging when cutting resinous or mixed materials and helps deliver faster material removal on rough cuts. The 30 cm length extends reach for deeper cuts and improved access in confined demolition or plumbing openings. The blade is designed to fit common reciprocating saw shanks, offering compatibility with a wide range of sabre (reciprocating) saws used by professionals and DIY users.

Suitable for

Key specifications

How to use

Install the blade in the reciprocating (sabre) saw according to the tool manufacturer's instructions, ensuring the blade is secured and oriented for cutting. Begin cutting at moderate speed to establish a controlled kerf, then increase stroke rate as appropriate for the material. For cutting wood with embedded nails or fasteners, use steady pressure and allow the bimetal teeth to work through the obstruction rather than forcing the blade. Keep the workpiece supported and clamp as needed to prevent vibration and improve cut accuracy.

Recommendations

For longer blade life, avoid overheating by using controlled feed rates and intermittent cutting on very dense or abrasive materials. Replace the blade when tooth pitch shows significant wear or when cutting performance declines. Use personal protective equipment and follow safe operating procedures for reciprocating saws.