QSFP-lähetin-vastaanotinmoduuli BlueOptics QSFP-PLR4-BI-BO 40 Mbit/s hopea

The BlueOptics QSFP-PLR4-BI-BO QSFP Transceiver Module in silver is a compact fiber optic transceiver designed for high-speed optical links. It supports a maximum data transfer rate of 40 Mbit/s over single‑mode fiber and uses an MTP/MPO connector for multi‑fiber termination. With a lightweight metal housing of approximately 0.04 kg and a QSFP form factor, the module is intended for integration into compatible network equipment to provide reliable optical connectivity over long distances.

Advantages

This QSFP transceiver provides a standardized QSFP interface and an MPO/MTP fiber connector to simplify installation and interoperability with MSA‑compliant ports. Its single‑mode optical design enables long reach transmission up to 10,000 m while maintaining immunity to electromagnetic interference inherent to fiber links. The compact, lightweight silver housing facilitates dense port deployment and simple handling during installation.

Suitable for

Key specifications

How to use

Insert the QSFP module into a compatible QSFP port on your switch, router or other network device while the host is powered down or following the vendor's hot‑swap guidance. Connect an MTP/MPO single‑mode patch cable to the module, ensuring correct fiber mapping and polarity between link endpoints. Verify link status through the host device's interface; if supported, enable or query digital diagnostics features to monitor optical parameters. Follow your hardware vendor’s instructions for firmware or boot‑time recognition if required.

Recommendations

Ensure the target hardware supports the QSFP-PLR4 physical and electrical interfaces and the module's optical wavelength characteristics. Use single‑mode MTP/MPO patch cords and appropriate patch panels to achieve the specified reach. Keep optical connectors clean and protected when not in use, and confirm that the host device supports any digital diagnostics (DDM/DOM) functions you plan to use.