Reikäsaha Bosch PRO Multi Material PC Plus 44/76 mm yksittäinen poranterä

Hole Saw Bosch PRO Multi Material PC Plus 44/76 mm Single Drill is designed for cutting clean holes in drywall, steel cladding, non-ferrous metals, plastic and softwood. The tool combines an enhanced tooth geometry with high-cobalt HSS (8% Co) alloy teeth for extended life and consistent performance. Bosch Power Change system enables quick removal of plugs and fast swapping of hole saws and pilot drills, supporting efficient interior installation tasks such as installing pipes, electrical boxes and recessed lighting.

Advantages

The PRO Multi Material PC Plus features high-speed steel with 8% cobalt for improved wear resistance and long life, while the optimized tooth design gives faster, smoother cuts and reduced effort. The Bosch Power Change mechanism simplifies changing hole saws and extracting material plugs, reducing downtime on site. The single-piece configuration ensures stable cutting and accurate hole dimensions.

Suitable for

• Drilling holes for electrical boxes and conduit installations
• Cutting openings for recessed lighting
• Creating passages for plumbing pipes
• Drilling through drywall, metal cladding, non-ferrous metals, plastic and softwood

Key specifications

• Brand: Bosch
• Model: PRO Multi Material PC Plus
• Diameter: 76 mm (44/76 mm configuration)
• Material: High-speed steel (HSS) with 8% cobalt
• Compatibility: Hole saw with Bosch Power Change system
• MPN: 2608594402
• EAN: 6949509240460

How to use

Attach the hole saw to a compatible arbor that supports the Bosch Power Change system and secure the pilot drill if required. Mark the centre of the hole on the workpiece, start drilling at low speed to establish the pilot, then increase speed moderately while maintaining steady pressure. When the cut is complete, stop the drill and use the Power Change mechanism to remove the plug and swap the saw if needed. Follow safety practices: clamp the workpiece, wear eye and hearing protection, and avoid excessive feed force.

Recommendations

Use appropriate cutting speeds and moderate feed force for the specific material. For metal and non-ferrous metals, secure the workpiece and use cutting lubricant if recommended. Replace worn saws to maintain cutting quality.